Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Maytag Dryer Not Heating
Options
Go to last post Go to first unread
Model: LDE7500 Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
Jim N  
#1 Posted : Thursday, December 13, 2007 5:45:44 AM(UTC)
Jim N

Rank: Member

Groups: Registered
Joined: 12/13/2007(UTC)
Posts: 3
My dryer was not heating. I found the heating element and the jumper wire were "broken" at the terminal. I replaced the complete heater assembly and jumper wire. The dryer will not run at all now. It "hums". Do I have it wired wrong? Is there a wiring diagram somewhere or do i need to replace the high limit thermostat or the fuse?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
kawfeeman  
#2 Posted : Thursday, December 13, 2007 8:05:34 PM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323
if you have a second person to help, leave drum door open and have someone depress the start button on control panel, while you depress the door switch and then try to push the paddle / baffle of drum clockwise.. if the drum turns on its own, you are getting / have a bad motor ( hopefully you did not wire anything wrong when you replaced the heater / jumper wires.. )
Back to top
Jim N  
#3 Posted : Friday, December 14, 2007 9:37:33 AM(UTC)
Jim N

Rank: Member

Groups: Registered
Joined: 12/13/2007(UTC)
Posts: 3
No, the motor is OK. If I connect both wires to the same terminal of the heating element, the dryer runs - no heat. I checked continuity thru the stat, the fuse and the heating element.
Back to top
Jim N  
#4 Posted : Friday, December 14, 2007 9:47:34 AM(UTC)
Jim N

Rank: Member

Groups: Registered
Joined: 12/13/2007(UTC)
Posts: 3
Maybe I connected wiring wrong? I connected purple wire from low-limt stat to hi-limt stat; white jumper from hi-limit stat to one heating element terminal; black wire from other heating element terminal to motor.
Back to top
Users browsing this topic
Similar Topics
Maytag Dryer not heating with rattle noise (Dryer Repair)
by Glengc1 6/24/2017 4:09:37 PM(UTC)
Maytag dryer not heating (Dryer Repair)
by Jmr721 4/29/2017 12:11:59 PM(UTC)
Maytag Dryer not heating up properly (Dryer Repair)
by BobG68 10/23/2011 11:45:22 PM(UTC)
Maytag dryer not heating (Dryer Repair)
by dee2011 7/5/2011 9:02:29 AM(UTC)
Maytag Dryer not heating (Dryer Repair)
by drs1023 5/23/2011 8:55:33 AM(UTC)
Maytag Dryer not heating well (Dryer Repair)
by indiana324 5/14/2011 11:52:25 AM(UTC)
Maytag dryer not heating properly (Dryer Repair)
by vpolitano 1/18/2010 9:37:23 PM(UTC)
Maytag dryer not heating (Dryer Repair)
by al todd 1/16/2010 2:23:00 PM(UTC)
Maytag dryer not heating, burned wires (Dryer Repair)
by cmorgand 1/5/2010 2:08:06 PM(UTC)
Maytag Dryer not heating (Dryer Repair)
by bytor 1/22/2009 6:59:50 PM(UTC)
Maytag dryer not heating. (Dryer Repair)
by elkski 10/25/2007 7:57:18 AM(UTC)
Maytag dryer not heating up on all cycles and not properly drying clothes. (Dryer Repair)
by radioman464 10/15/2007 12:36:28 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET