Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
13 Pages«<23456>»
GE Front Load Washer won't tumble/spin
Options
Go to last post Go to first unread
Model: WBVH6240 Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
yiming  
#31 Posted : Friday, February 5, 2010 1:18:41 PM(UTC)
yiming

Rank: Member

Groups: Registered
Joined: 1/26/2010(UTC)
Posts: 19
Originally Posted by: Gene Go to Quoted Post
Sounds like the main control board is the culprit.


Gene.

Thanks Gene. Now how do I remove control board?
Back to top
Gene  
#32 Posted : Sunday, February 7, 2010 7:02:04 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. The instructions are attached to the reply.

Gene.
File Attachment(s):
Control panel removal.doc (313kb) downloaded 69 time(s).
Back to top
yiming  
#33 Posted : Tuesday, February 9, 2010 6:13:54 AM(UTC)
yiming

Rank: Member

Groups: Registered
Joined: 1/26/2010(UTC)
Posts: 19
Hi Gene,

I was able to remove the control board with your instructions. One last question before I order the new part AP3995160 which is listed for Mode# WHDVH626F0WW. My model# says WHDVH626FFW which is almost, but not exactly the same. Do you know the difference between them in terms of the control board asm?
Back to top
Gene  
#34 Posted : Tuesday, February 9, 2010 2:03:16 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The model number you posted (WHDVH626FFW) does not come up. Verify and repost it.

Gene.
Back to top
yiming  
#35 Posted : Tuesday, February 9, 2010 6:53:54 PM(UTC)
yiming

Rank: Member

Groups: Registered
Joined: 1/26/2010(UTC)
Posts: 19
Sorry, my mistake. The model number should be WHDVH626FWW. Can you check if the control board (AP3995160) is made for this model? Thanks.
Back to top
Gene  
#36 Posted : Wednesday, February 10, 2010 8:54:51 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: yiming Go to Quoted Post
Sorry, my mistake. The model number should be WHDVH626FWW. Can you check if the control board (AP3995160) is made for this model? Thanks.


Are you sure there is no zero between "F" and "W" in the model number?

Gene.
Back to top
yiming  
#37 Posted : Thursday, February 11, 2010 7:17:02 AM(UTC)
yiming

Rank: Member

Groups: Registered
Joined: 1/26/2010(UTC)
Posts: 19
Yes, I am sure no zero there. I already ordered the part and will give it try after I receive it. Thanks.
Back to top
yiming  
#38 Posted : Monday, February 15, 2010 12:43:09 PM(UTC)
yiming

Rank: Member

Groups: Registered
Joined: 1/26/2010(UTC)
Posts: 19
Hi Gene,

The new control board didn't actually fix the problem. What should I do now? Please help.
Back to top
Gene  
#39 Posted : Monday, February 15, 2010 3:17:18 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Is the problem stays exactly the same or something changed?

Gene.
Back to top
yiming  
#40 Posted : Tuesday, February 16, 2010 5:58:36 AM(UTC)
yiming

Rank: Member

Groups: Registered
Joined: 1/26/2010(UTC)
Posts: 19
Same problem as before. On startup, I set the model to 01 then tried "t10" and "t11". It doesn't spin at all. Also tried "rinse/spin" cycle with no spinning observed at the "spin" cycle, only a couple of slow back and forth spinning at the beginning.

One difference with the new control board is no "t14" available in the test mode. It goes up to "t13".
Back to top
Users browsing this topic
Similar Topics
ge front load washer won't tumble/spin (Washer Repair)
by Laeloni 3/26/2011 10:07:27 AM(UTC)
13 Pages«<23456>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET