Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Will not spin!
Options
Go to last post Go to first unread
Model: LA5550XTW0 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
amburn02  
#1 Posted : Saturday, March 7, 2009 11:44:59 AM(UTC)
amburn02

Rank: Member

Groups: Registered
Joined: 3/7/2009(UTC)
Posts: 8
The waher works great, however it will not spin. The lid switch meters good.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Drags1998  
#2 Posted : Saturday, March 7, 2009 12:03:13 PM(UTC)
Drags1998

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/7/2008(UTC)
Posts: 750
Does the motor run when spin is selected? If the motor runs, Check the DRIVE COUPLING!!!!:)
Back to top
amburn02  
#3 Posted : Saturday, March 7, 2009 12:17:06 PM(UTC)
amburn02

Rank: Member

Groups: Registered
Joined: 3/7/2009(UTC)
Posts: 8
The motor runs great. Where would the drive coupler be located? :confused:
Back to top
Drags1998  
#4 Posted : Saturday, March 7, 2009 12:37:22 PM(UTC)
Drags1998

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/7/2008(UTC)
Posts: 750
It is located between the Motor and the Transmission, If you lay the washer back so you can look under it, Its 2 white plastic pieces with a black rubber between them.:)
Back to top
amburn02  
#5 Posted : Monday, March 9, 2009 12:04:18 PM(UTC)
amburn02

Rank: Member

Groups: Registered
Joined: 3/7/2009(UTC)
Posts: 8
I checked the coupling and it looks good. What next?
Back to top
amburn02  
#6 Posted : Thursday, March 12, 2009 2:38:07 PM(UTC)
amburn02

Rank: Member

Groups: Registered
Joined: 3/7/2009(UTC)
Posts: 8
I have checked the switch it meters good, checked the coupling it looks good and also the clutch looks good. Also the motor runs in the spin cycle I am lost please help with what it could be wrong.:confused:
Back to top
Gene  
#7 Posted : Friday, March 13, 2009 12:32:44 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Check the drive block as described in one of our previous posts: http://forum.appliancepartspros...ir/373-not-spinning.html.

Here are the break down diagrams and Replacement parts for WHIRLPOOL LA5550XTW0 | AppliancePartsPros.com

Gene.
Back to top
amburn02  
#8 Posted : Friday, March 13, 2009 2:47:50 PM(UTC)
amburn02

Rank: Member

Groups: Registered
Joined: 3/7/2009(UTC)
Posts: 8
As I stated the coupling (Drive Block) is good. If the motor and pump is working on spin in all three locations it's not the timer? Could it be in the transmisson? :rolleyes:
Back to top
Gene  
#9 Posted : Friday, March 13, 2009 5:25:06 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Coupling and drive block are absolutely different parts. Can you refer to the diagram numbers which part did you call "coupling"?

Does the washer drain? If it does then open and close the lid while it's draining. Post the results.

Gene.
Back to top
amburn02  
#10 Posted : Friday, March 13, 2009 5:37:50 PM(UTC)
amburn02

Rank: Member

Groups: Registered
Joined: 3/7/2009(UTC)
Posts: 8
I the swith meters good also I have jumped it out of the loop.:cool:
Back to top
Users browsing this topic
Guest (5)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET