Rank: Member
Groups: Registered
Joined: 6/14/2011(UTC) Posts: 3
|
Dishwasher has no lights...wont start. Checked power. There is power until after the door switch to the thermal fuse but i dont get anything after. Is it that simple that the thermal fuse needs to be replaced or is there something else i should be checking.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
Replacement parts for DU943PWKTO models | AppliancePartsPros.comYes it could be as simple as replacing the thermal fuse (Item 4 in Section 1). You checked power so you probably have a meter, just pull the fuse and check it. It should be 0 ohms. If it is blown when you replace it be sure to use the new harness that comes with it. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 6/14/2011(UTC) Posts: 3
|
thank you for responding. it was my thermal fuse after all. but it was too good to be true. i cannot for the life of me put the door back together. are there any tips, solutions, etc... that anyone knows... whirlpool dishwasher model no. du943pwkt0....thanks
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
|
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 6/14/2011(UTC) Posts: 3
|
i was able to finally get the door back together....but thank you for responding. i appreciate it.
|
|
|
|
Rank: Guest
Groups: Guests
Joined: 8/10/2018(UTC) Posts: 0 Location: 99556 Was thanked: 4 time(s) in 4 post(s)
|
I just picked up a Danby DDW631SDB Countertop Dishwasher. When I got it I was told that it leaks out the bottom. I opened it up to find a piece is broken and it looks like a hose is missing. I can attach the photo I took, but I'm looking for a photo of the base setup from factory. If anyone can find one please send it to me. Edited by user Thursday, September 29, 2022 4:28:54 PM(UTC)
| Reason: Corrected information.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close