Rank: Member
Groups: Registered
Joined: 2/3/2009(UTC) Posts: 1
|
Ran the self cleaning cycle which worked fine. When I tried to use the oven several days later---NO HEAT.
Reset the breaker but did not help. The stovetop works ok. Control panel works.
I can set the oven temp for bake or broil. When I press start I hear the relay click but elements don't get hot.
I replaced the bake element less last year.
Any ideas?
Thanks
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Pull the range out of the wall, remove the back panel and check the safety thermostat (#9 on the break down diagram) for continuity. Replace if it's open. - The part number for the thermostat is AP2928571Here are the break down diagrams for the Kitchen Aid range Model KESC300BAL5Gene.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close