Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Ge Triton xl
Options
Go to last post Go to first unread
Model: GSD6660G02SS Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
mcallitsis  
#1 Posted : Tuesday, January 20, 2009 5:20:34 PM(UTC)
mcallitsis

Rank: Member

Groups: Registered
Joined: 1/20/2009(UTC)
Posts: 3
I recently replaced the detergent assembly and in doing so ripped the front panel electrical source off when the door fell apart. Do I have to buy a whole new front panel or can I just replace the electrical source that ripped off the mother board?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Wednesday, January 21, 2009 1:09:18 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here is a parts breakdown
Model Search

Could you please explain it a little better.
There are a number of plugs going to the control board.
Which one ripped off?
Is the plug damaged?
Is the control board damaged?
THIS FORUM IS DEAD!!!!!!!
Back to top
mcallitsis  
#3 Posted : Wednesday, January 21, 2009 3:09:48 PM(UTC)
mcallitsis

Rank: Member

Groups: Registered
Joined: 1/20/2009(UTC)
Posts: 3
part 901 for this model the strip of tape on the back of this part ripped in half. It is electrical and attaches to motherboard. I can't explain it much better because I don't know the exact part name.
Back to top
denman  
#4 Posted : Wednesday, January 21, 2009 6:18:54 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Just to confirm what ripped in half.
It is the cable that is sticking out on the right hand side of the Part 901 diagram.
It is a ribbon cable.
To get it you have to buy the complete part 901 (Keypad)
It is hard wired to the keypad.
If you have a friend who is into electronics they may be able to fix it.
Taking it to a shop would probably cost you as much as a new keypad.
THIS FORUM IS DEAD!!!!!!!
Back to top
mcallitsis  
#5 Posted : Thursday, January 22, 2009 9:21:12 AM(UTC)
mcallitsis

Rank: Member

Groups: Registered
Joined: 1/20/2009(UTC)
Posts: 3
Thank you thats what I needed to know. Will I be able to attach the other end of the ribbon cable from the keypad to the other part or do I just need to go ahead and call a repairman?
Back to top
denman  
#6 Posted : Thursday, January 22, 2009 10:56:38 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Take a look at the parts breakdown Section1.
#901 Keypad's ribbon cable plugs into #905 Module Control. Click on the pictures for a better view and you can clearly see where it plugs in.

Whether to get a tech or not depends upon your comfort level.
I definitely would do it but I have always enjoyed taking things apart and putting them back together (most of the time).

You got it apart you should be able to get it back together, just take your time
THIS FORUM IS DEAD!!!!!!!
Back to top
denman  
#7 Posted : Thursday, January 22, 2009 11:03:55 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Duplicated the last one
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (5)
Similar Topics
GE Triton XL (Dishwasher Repair)
by engrguy 7/5/2017 7:06:55 AM(UTC)
GE Triton XL not fully draining (Dishwasher Repair)
by Frank58 5/12/2015 4:30:10 AM(UTC)
GE Triton XL - Stuck on rinse cycle, drain pump runs constantly (Dishwasher Repair)
by str-il 5/16/2013 4:02:50 PM(UTC)
old GE Triton XL: easy to replace heating element?? (Dishwasher Repair)
by Paul_illinois 12/28/2012 10:06:53 AM(UTC)
GE TRITON XL water starts into machine but never washes (Dishwasher Repair)
by NC dishwasherprob 2/24/2012 10:13:20 AM(UTC)
GE Triton XL Middle Spray Arm missing O-ring (Dishwasher Repair)
by Johan Stayple 5/11/2011 10:23:26 PM(UTC)
GE Triton XL water inlet valve trips breaker (Dishwasher Repair)
by ryanbdkane 3/10/2011 7:22:30 PM(UTC)
GE Triton XL Dishwasher (Dishwasher Repair)
by Randye 2/23/2011 7:54:44 AM(UTC)
GE Triton XL will not drain (Dishwasher Repair)
by SisQ 2/22/2011 5:03:40 PM(UTC)
GE Triton XL Bottom Seal Replacement (Dishwasher Repair)
by kameltarazi 1/23/2011 11:29:13 AM(UTC)
replacing soap dispenser for GE triton XL (Dishwasher Repair)
by tuabui 5/24/2010 6:46:36 AM(UTC)
GE Triton XL Leaking from Front Right (Dishwasher Repair)
by jlewin 2/21/2010 6:50:23 AM(UTC)
GE Triton XL dishwasher not draining water completely (Dishwasher Repair)
by ajain99 1/12/2010 11:49:37 AM(UTC)
GE Triton XL leaves top rack dishes/glasses dirty (Dishwasher Repair)
by dsovetsky 10/15/2009 9:03:07 AM(UTC)
GE Triton XL will not pump water in (Dishwasher Repair)
by xfeejayx 8/1/2009 9:16:14 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET