Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Greg
Options
Go to last post Go to first unread
Model: 363.8791582 Brand: Kenmore Age: More than 10 years
Previous Topic Next Topic
gregkern  
#1 Posted : Monday, April 25, 2011 10:23:48 AM(UTC)
gregkern

Rank: Member

Groups: Registered
Joined: 4/25/2011(UTC)
Posts: 5
The freezer is woking fine just the frig is not getting cold. I have control box apart and have tested thermostat with ohm meter on Rx1 setting I am getting a reading of.9. What might be suggestions of why frig is not getting cold?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Monday, April 25, 2011 12:26:39 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Does the fan inside the freezer work?

Did you clean the condenser coils?

Does the fan next to the compressor work?

Remove the rear panel inside the freezer and check how the evaporator coils are covered with snow.

Gene.
Back to top
gregkern  
#3 Posted : Monday, April 25, 2011 5:05:35 PM(UTC)
gregkern

Rank: Member

Groups: Registered
Joined: 4/25/2011(UTC)
Posts: 5
1) yes
2) where are condensor coils
3) yes
4) evaporator coils are covered in frost
Back to top
Gene  
#4 Posted : Tuesday, April 26, 2011 12:13:28 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The condenser coils are showed as #730 on the diagram.

How much frost is on the coils?

Gene.
Back to top
gregkern  
#5 Posted : Tuesday, April 26, 2011 3:51:07 AM(UTC)
gregkern

Rank: Member

Groups: Registered
Joined: 4/25/2011(UTC)
Posts: 5
Coils have been cleaned and the Evaporator coils are completely covered and thick with ice. I unplugged last night to defrost.
Back to top
gregkern  
#6 Posted : Tuesday, April 26, 2011 12:01:59 PM(UTC)
gregkern

Rank: Member

Groups: Registered
Joined: 4/25/2011(UTC)
Posts: 5
Coils completely coverded with ice. unpluggged and let defrost.
Back to top
Gene  
#7 Posted : Tuesday, April 26, 2011 12:48:30 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
It might be a problem with the defrost system. If it will reappear, let us know.

Gene.
Back to top
gregkern  
#8 Posted : Tuesday, April 26, 2011 1:50:38 PM(UTC)
gregkern

Rank: Member

Groups: Registered
Joined: 4/25/2011(UTC)
Posts: 5
Starting to frost over and drug only at 45 degrees and freezer cold.
Back to top
Gene  
#9 Posted : Tuesday, April 26, 2011 2:04:05 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Give it 24 hours since you plugged it back. All panels must be in place.

Gene.
Back to top
Users browsing this topic
Similar Topics
greg a (Refrigerator & Freezer Repair)
by greg allen 4/15/2013 8:47:02 AM(UTC)
greg (Dryer Repair)
by gsydor 2/9/2012 12:50:07 PM(UTC)
Greg z (Washer Repair)
by Greg Z 1/27/2012 5:22:22 PM(UTC)
Gregory Houraney (Refrigerator & Freezer Repair)
by carrieg 1/17/2012 10:59:25 AM(UTC)
greg (Refrigerator & Freezer Repair)
by gazar 9/26/2007 9:36:59 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET