Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Dryer won't stop
Options
Go to last post Go to first unread
Model: LE7680S Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
nrowe46  
#1 Posted : Saturday, December 4, 2010 10:41:00 AM(UTC)
nrowe46

Rank: Member

Groups: Registered
Joined: 12/4/2010(UTC)
Posts: 7
When placed in auto dry mode it runs continually. If placed on a certain time it will stop. Could this be a problem with sensor?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
kayakcrzy  
#2 Posted : Saturday, December 4, 2010 2:31:32 PM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Originally Posted by: nrowe46 Go to Quoted Post
When placed in auto dry mode it runs continually. If placed on a certain time it will stop. Could this be a problem with sensor?


Yes. Before you replace it clean the sensor with alcohol, and then give it a try. Also, make sure the vent is clear to the outside. Also, sometimes the one of the wires fall of the sensor. You have to take the front off to viiew the wires. Tom Appliance Educator, Appliance Parts, Washer and Dryer Parts, Refridgerator and Freezer Parts, Stove and Oven Parts
Back to top
denman  
#3 Posted : Sunday, December 5, 2010 3:26:25 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for LE7680S models | AppliancePartsPros.com

I do not see a sensor in the parts breakdown.
Are you sure that you have a sensor?

Many units do not have a dryness sensor when in an Auto Mode the timer motor gets power through the heating element when it is turned off.
If the heating element does not turn off for some reason (probably grounded) the timer will not advance.
Also it runs through a separate set of timer contacts.
Try the unit in air fluff, does the heater stay off?
Does the timer now advance?

Hopefully the unit has an air fluff auto cycle.
THIS FORUM IS DEAD!!!!!!!
Back to top
kayakcrzy  
#4 Posted : Sunday, December 5, 2010 3:57:25 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Originally Posted by: denman Go to Quoted Post
Here are your parts
Replacement parts for LE7680S models | AppliancePartsPros.com

I do not see a sensor in the parts breakdown.
Are you sure that you have a sensor?

Many units do not have a dryness sensor when in an Auto Mode the timer motor gets power through the heating element when it is turned off.
If the heating element does not turn off for some reason (probably grounded) the timer will not advance.
Also it runs through a separate set of timer contacts.
Try the unit in air fluff, does the heater stay off?
Does the timer now advance?

Hopefully the unit has an air fluff auto cycle.


Well Denam there is a case of Tom assuming, and not looking at the picture!! You know what they say about Assume? LOL!!! I did not see a sensor either. It very well could be vent issue, where the thermostat is not getting satisfied, to advance the timer. Never a fun one to diagnose, not being there. Good Job, slapping the service man around Denman!!! LOL!! Tommy Boy!!!!
Back to top
nrowe46  
#5 Posted : Monday, December 6, 2010 10:58:08 AM(UTC)
nrowe46

Rank: Member

Groups: Registered
Joined: 12/4/2010(UTC)
Posts: 7
I checked the vent and it is clear. I can see a sensor on the back of the drum. Seems to be two strips. How do I get at this?
Back to top
denman  
#6 Posted : Monday, December 6, 2010 12:09:12 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
OK your model must be an XSW1
Here is the parts breakdown for that unit.
Replacement parts for WHIRLPOOL LE7680XSW1 | AppliancePartsPros.com

Just reach in and clean them with damp cloth.
You may have to use isopropyl alcohol.
What is important is to get them clean between the strips.
If there is dirt between them it acts like a conductor and the unit thinks the clothes are wet.
Do not go crazy with the alcohol as it is flammable.
THIS FORUM IS DEAD!!!!!!!
Back to top
nrowe46  
#7 Posted : Saturday, December 11, 2010 7:46:40 AM(UTC)
nrowe46

Rank: Member

Groups: Registered
Joined: 12/4/2010(UTC)
Posts: 7
Cleaned with alcohol and water. Still does not stop and timer does not advance. How do I get at the wires to check continuity?
Back to top
denman  
#8 Posted : Saturday, December 11, 2010 8:37:56 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Looking at the parts breakdown you should be able to get at them by taking the back panel off.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Maytag dryer won't stop on timed dry (Dryer Repair)
by eaglemtn 11/11/2021 5:35:16 PM(UTC)
LG dryer won't stop tumbling (Dryer Repair)
by Danimal111 3/2/2018 9:53:47 AM(UTC)
Samsung Dryer won't stop running (Dryer Repair)
by Newbomb_Turk 12/6/2016 7:41:11 AM(UTC)
LP dryer won't stop running (Dryer Repair)
by rreyn 2/11/2015 2:53:15 PM(UTC)
Whirlpool Dryer won't stop running (Dryer Repair)
by Dave1234567 10/19/2014 5:45:40 AM(UTC)
Dryer won't stop running with heat-potential fire hazard (Dryer Repair)
by snowbound9 2/19/2014 5:37:54 AM(UTC)
Dryer won't stop spinning (Dryer Repair)
by Ddau 12/8/2013 6:15:22 PM(UTC)
Dryer won't stop (Dryer Repair)
by brendangall 4/8/2013 7:36:24 PM(UTC)
dryer won't stop after cylces (Dryer Repair)
by isabelg 3/13/2012 8:58:26 AM(UTC)
Roper dryer won't stop on auto sense dry. (Dryer Repair)
by outbackblackjack 2/11/2012 12:56:06 PM(UTC)
Roper dryer won't stop on auto sense dry. (Dryer Repair)
by outbackblackjack 2/11/2012 11:14:53 AM(UTC)
Dryer won't stop heating! (Dryer Repair)
by geotreker1 6/6/2011 3:32:10 PM(UTC)
Dryer won't stop buzzing or shut off (Dryer Repair)
by talbany1 5/19/2011 7:08:01 AM(UTC)
Dryer won't stop and no heat (Dryer Repair)
by krazykarl05 2/3/2011 8:42:17 AM(UTC)
Dryer won't stop running (Dryer Repair)
by dwiz 7/28/2010 9:57:16 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET