Rank: Member
Groups: Registered
Joined: 10/14/2008(UTC) Posts: 2
|
The tub does not spin any more. I imagine it's a belt or switch. I've searched for parts but the search doesn't find this model.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 10/9/2008(UTC) Posts: 784
|
If it pumps and doesn't spin you need a coupler Whirlpool part 285753 if the machine is totally dead when it goes into a spin cycle its the lid switch. There are other varibles involved this I gave out is most common, If the coupler is broken it wont wash either all the machine will do is fill and pump and make a grinding noise while its doing it
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/14/2008(UTC) Posts: 2
|
Originally Posted by: v2k04 If it pumps and doesn't spin you need a coupler Whirlpool part 285753 if the machine is totally dead when it goes into a spin cycle its the lid switch. There are other varibles involved this I gave out is most common, If the coupler is broken it wont wash either all the machine will do is fill and pump and make a grinding noise while its doing it Thanks a lot, v2k04!
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
In order to provide most accurate advise we need the complete model number of the washer. You can find it under the lid. The model number you posted is not a valid Whirlpool model number.
Gene.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close