Rank: Member
Groups: Registered
Joined: 9/29/2010(UTC) Posts: 3
|
Dear Tech,
No smell of gas inside oven, stove top working. Whern turning on R selector to qven and then L Temperature oven does not fire up.
Ignitor was changed successfully 4 months ago and oven worked therafter.
Diagram is on this web site. Thank you Frank
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC) Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: angie1754 Dear Tech,
No smell of gas inside oven, stove top working. Whern turning on R selector to qven and then L Temperature oven does not fire up.
Ignitor was changed successfully 4 months ago and oven worked therafter.
Diagram is on this web site. Thank you Frank Does the broiler work and heat ? Are you sure the new igniter is not the problem ? (loose connection, cracked broken igniter, etc.) Do you have a VOM multimeter so you can check for voltage to the bake igniter from the thermostat ? This is where we need to start , so we know what direction to take. :) :) :)
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/29/2010(UTC) Posts: 3
|
Joe M. Thank you
NO the broiler does not work and light/ heat up.
Remember I stated that I don`t think there is anything wrong with the ignitor because there is no smell of gas entering the area of the ignitor as was the case when I needed to change the ignitor 5 months ago.
Frank
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC) Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: angie1754 Joe M. Thank you
NO the broiler does not work and light/ heat up.
Remember I stated that I don`t think there is anything wrong with the ignitor because there is no smell of gas entering the area of the ignitor as was the case when I needed to change the ignitor 5 months ago.
Frank Frank, Check and make sure, your Clock is Not set in a Self Clean or Timed Bake, setting, by mistake, It has to be set in a Manual mode for the oven to operate, If that checks OK. You will need to check for 120 VAC across the 2 wires to the igniter(s), from the thermostat / control with the oven in a bake and broil settings, to determine if you have a broken wire or inoperative control. Good Luck, :) :) :)
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close