Rank: Member
Groups: Registered
Joined: 8/20/2008(UTC) Posts: 5
|
I have an Ultimate Care II dryer and no heat is coming out of it.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC) Posts: 3,097
|
post your model number please. Nat
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/20/2008(UTC) Posts: 5
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC) Posts: 3,097
|
Open your dryer door, there's a tag around the opening where your clothes go. Nat
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/20/2008(UTC) Posts: 5
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC) Posts: 3,097
|
Thanks, For starters lets start with the basics, go to your breaker box and turn the dryer breaker off wait a few seconds then turn it back on. Try the dryer see if it heats. If not then we'll move on to the next step. Get your ohm meter. Nat
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/20/2008(UTC) Posts: 5
|
Did not work. What's next?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC) Posts: 3,097
|
do you have an ohm meter?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC) Posts: 3,097
|
If you have an ohm meter.... remove the rear panel and look at where the wires make connections. Remove one set of connections at a time and test for continuity on each thermostat, if one has continuity then replace wires and move to the next. If all the thermostats have continuity then unplug the element and test it. Post your results. Nat
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/20/2008(UTC) Posts: 5
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close