Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Need help with dryer
Options
Go to last post Go to first unread
Model: LER5636EQ3 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
Bowhunter1084  
#1 Posted : Saturday, September 8, 2007 2:04:34 PM(UTC)
Bowhunter1084

Rank: Member

Groups: Registered
Joined: 9/8/2007(UTC)
Posts: 1
I'm not sure if my heating element is out or not. I still have heat but I have to run the dryer 2-3 cycles in order to dry one load of clothes all the way. I cleaned out the lint traps and don't know if it could just be a heating element. Does anyone here know? Thanks for the help!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
xtrmwing  
#2 Posted : Sunday, September 9, 2007 7:25:32 PM(UTC)
xtrmwing

Rank: Member

Groups: Registered
Joined: 9/9/2007(UTC)
Posts: 2
it is probably the bi-metal thermostat if you have a good exhaust flow and you are getting some heat, if the thermo cycles too early(shuts element off at a lower temp) it will need replaced
Back to top
richappy  
#3 Posted : Monday, September 10, 2007 5:00:17 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Very rare a thermostat fails like this, you may have a burnt wire or your dryer is overheating. Remove ducting from dryer, stick a thermometer in the duct and run dryer. Post the temperature.
Back to top
Gene  
#4 Posted : Monday, September 10, 2007 9:40:19 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
In addition to all above:
Most likely the problem is clogged up vent outside the dryer. All moister stays inside the dryer due to insufficient air flow causing long time to dry.
Disconnect the vent hose from the back of the dryer and run a couple loads with the hose disconnected. You should see a big difference.

Good luck.
Gene.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Need help with dryer not staying lit (Dryer Repair)
by dave50 7/18/2013 4:34:33 PM(UTC)
need help with dryer (Dryer Repair)
by oklabull 6/14/2010 5:15:07 AM(UTC)
need help with dryer (Dryer Repair)
by butterfly2boys 4/2/2009 6:10:58 PM(UTC)
Need Help with dryer (Dryer Repair)
by pahokee58 8/27/2008 11:51:47 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET