Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Dishwasher does not fill
Options
Go to last post Go to first unread
Model: GSD3230Z01WW Brand: GE Age: More than 10 years
Previous Topic Next Topic
akhan  
#1 Posted : Saturday, October 6, 2018 8:30:46 AM(UTC)
akhan

Rank: Member

Groups: Registered
Joined: 11/14/2008(UTC)
Posts: 3
My dishwasher will not fill, I’ve changed the inlet water valve, checked the float switch which works,. No power to inlet valve so I thought it maybe the float switch, however when testing continuity, this worked fine. The machine appears to be working but cannot hear the unit going into the cycles for water to fill into the machine. Checked door latch all ok, Any additional help would be grateful.
Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
akhan  
#2 Posted : Tuesday, October 9, 2018 10:53:06 AM(UTC)
akhan

Rank: Member

Groups: Registered
Joined: 11/14/2008(UTC)
Posts: 3
Hi Ohm
the problem was the timer, there was no continuity to the motor part, the one that has two pin plug. Installed a new timer unit and the dishwasher is working again. Just a heads up to anyone else that may have this problem, when I finished installing everything the soap dispenser door would not close. Checked the springs- all ok, finally resolved problem by figuring out the old timer unit had a plastic wheel, which did not come with the new unit. Re attached the wheel to the new unit and presto, the soap door now closes.
thanks again.
Back to top
Billy889  
#3 Posted : Tuesday, October 9, 2018 11:06:11 AM(UTC)
Billy889

Rank: Member

Groups: Registered
Joined: 9/29/2018(UTC)
Posts: 17
Originally Posted by: akhan Go to Quoted Post
Hi Ohm
the problem was the timer, there was no continuity to the motor part, the one that has two pin plug. Installed a new timer unit and the dishwasher is working again. Just a heads up to anyone else that may have this problem, when I finished installing everything the soap dispenser door would not close. Checked the springs- all ok, finally resolved problem by figuring out the old timer unit had a plastic wheel, which did not come with the new unit. Re attached the wheel to the new unit and presto, the soap door now closes.
thanks again.

+1
UserPostedImage
Back to top
nestof3  
#4 Posted : Saturday, October 27, 2018 12:37:41 PM(UTC)
nestof3

Rank: Member

Groups: Registered
Joined: 10/27/2018(UTC)
Posts: 0
United States
Location: Virginia
Yesterday, water filled in the bottom of the unit but didn’t spray. Today, water isn’t even entering the unit.

We have tested the float switch, the water hose, and the water inlet valve (which we placed).

Whirlpool WDF750SAYW1
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Bosch Dishwasher does not fill (Dishwasher Repair)
by crockega 2/7/2011 8:46:29 AM(UTC)
Dishwasher does not fill with water (Dishwasher Repair)
by HarryW 11/19/2010 6:18:20 PM(UTC)
Dishwasher does not fill with water - spray arms not moving (Dishwasher Repair)
by gilwood 7/16/2010 6:43:27 AM(UTC)
dishwasher does not fill (Dishwasher Repair)
by kbappliance 7/8/2009 9:49:21 AM(UTC)
Dishwasher does not fill all the way (Dishwasher Repair)
by ljhnstn 5/27/2009 9:41:22 AM(UTC)
dishwasher does not fill with water - missing float (Dishwasher Repair)
by TOM COTTER 3/13/2009 3:20:30 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET