Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

4 Pages<1234>
Options
Go to last post Go to first unread
brobriffin  
#11 Posted : Friday, June 9, 2017 7:40:29 AM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
Your outer bearing looks to be in great shape BTW.....
Kovachbt  
#12 Posted : Sunday, June 11, 2017 12:28:17 PM(UTC)
Kovachbt

Rank: Member

Groups: Registered
Joined: 5/31/2017(UTC)
Posts: 19

Question...I can't believe I unloosened this clapand lost the nut.

I couldn't find this under the clamps and I cannot find locally....yet. Other clamps will not holt the tube in place. This comes from the tub to a drain hose

Pic attached

Thank you
Kovachbt attached the following image(s):
IMG_0850.JPG
brobriffin  
#13 Posted : Sunday, June 11, 2017 3:30:18 PM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
Would a screw type clamp work like you could get at auto parts store?
brobriffin  
#14 Posted : Sunday, June 11, 2017 3:37:33 PM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
If your hunting clamps I must imagine you've removed and fixed the support arm?
Kovachbt  
#15 Posted : Sunday, June 11, 2017 4:01:54 PM(UTC)
Kovachbt

Rank: Member

Groups: Registered
Joined: 5/31/2017(UTC)
Posts: 19

Yep.... the tub to pump hose is the only thing that remains.


I've tried zip ties regular screw clamp but nothing holds the hose. It keeps slipping off

Was hoping it could get through the site. Going to look at some local repair center tomorrow

Anxious to see if the washer is fixed.... let alone do laundry

Thanks for all your help
brobriffin  
#16 Posted : Sunday, June 11, 2017 5:08:34 PM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
http://www.appliancepartspros.c...65-00014a-ap4206370.html

this is the part # of the clamp you seek
Kovachbt  
#17 Posted : Wednesday, June 14, 2017 1:14:28 PM(UTC)
Kovachbt

Rank: Member

Groups: Registered
Joined: 5/31/2017(UTC)
Posts: 19

Wish I was writing with good news

Washer is together and taking it for a test run on spin cycle.

Tub fills up and it seems to want to spin but doesn't... tub rocks minimally and seems stuck in the cycle

Not sure what to do expect go back thru and verify all the connections


Could I not have the magnet and stator on completely?
Kovachbt  
#18 Posted : Wednesday, June 14, 2017 1:23:55 PM(UTC)
Kovachbt

Rank: Member

Groups: Registered
Joined: 5/31/2017(UTC)
Posts: 19

Ok.... went back and shook the tub / manually spun it. Ran the rise cycle and it actually spun for a few rotations and froze back up.
brobriffin  
#19 Posted : Wednesday, June 14, 2017 2:28:09 PM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
Check all wiring connections.
Remove rotor and check for proper stator placement.
Check wiring to stator, it has a rotor position sensor.
Replace rotor making sure it is completely seated over stator.
recheck a rinse and spin cycle
Kovachbt  
#20 Posted : Thursday, June 15, 2017 4:09:39 AM(UTC)
Kovachbt

Rank: Member

Groups: Registered
Joined: 5/31/2017(UTC)
Posts: 19

Good morning

Sending you this attachment.... is this normal that the shaft is not flush with the housing? Could this be my issue?

Thank you
Kovachbt attached the following image(s):
IMG_0873.JPG
Users browsing this topic
Guest (2)
4 Pages<1234>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.