Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
4 Pages«<234
Samsung VRT Vibrating/Knocking at spin (high RPM)
Options
Go to last post Go to first unread
Model: WF330ANB/XAA 01 Brand: Samsung Age: 5 - 10 years
Previous Topic Next Topic
Kovachbt  
#31 Posted : Saturday, June 17, 2017 8:19:18 AM(UTC)
Kovachbt

Rank: Member

Groups: Registered
Joined: 5/31/2017(UTC)
Posts: 19
So..... the clicking sound only occurs if the power is on. No clicking if manually turning the rotor
Back to top
brobriffin  
#32 Posted : Saturday, June 17, 2017 8:24:18 AM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
Is this without the stator installed?
Back to top
WWW
Kovachbt  
#33 Posted : Saturday, June 17, 2017 9:18:39 AM(UTC)
Kovachbt

Rank: Member

Groups: Registered
Joined: 5/31/2017(UTC)
Posts: 19
Yes, I even removed the stator, and was able to manually Turn the tub without any problems
Back to top
brobriffin  
#34 Posted : Saturday, June 17, 2017 9:53:04 AM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
Ok then when you reinstall the stator and run the machine is when the sound occurs?
1. verify the stator is installed flush (not higher on one side or the other)
2. verify there is no debris on any of the magnets on the rotor (screws, paper clips etc)
3. verify the wires are plugged in and seated properly on the stator
after reinstalling and verifying the above run a test to see if problem continues
Back to top
WWW
Kovachbt  
#35 Posted : Saturday, June 17, 2017 10:34:30 AM(UTC)
Kovachbt

Rank: Member

Groups: Registered
Joined: 5/31/2017(UTC)
Posts: 19
Yes...after the stator is installed and I run the spin cycle, the washer fills and

1) either rotates in one direction for 2-3 spins and stops then the clicking returns and the tub rocks as if trying to spin but can't turn

2) or..after the tub fills, you hear the clicking and you can see the tub rock as if trying to spin

Nothing is on the magnets. As for the stator, it looks fine to me but maybe something is wrong

When I hear the clicking and see the direction the tub is trying to turn, I can rotate the tub in that direction and usually it will start to spin..... but only a few rotations


I truly have appreciated your time and help. My wife called a Samsung tech to come Wednesday. I was told to accept defeat
Back to top
Kovachbt  
#36 Posted : Wednesday, June 21, 2017 1:20:15 PM(UTC)
Kovachbt

Rank: Member

Groups: Registered
Joined: 5/31/2017(UTC)
Posts: 19
I thought that I would bring you up to speed on the washer. The Samsung repair tech said that my circuit board was bad. He attempted to run some test cycles and the machine did not respond.

A New board has been ordered.... hopefully, that will resolve my issue

Thanks
Back to top
brobriffin  
#37 Posted : Wednesday, June 21, 2017 5:38:17 PM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
Keep me updated plz
Hope it works out for you.
Back to top
WWW
Users browsing this topic
Guest (4)
4 Pages«<234
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET