4 Pages<1234> Go to Page...

Samsung VRT Vibrating/Knocking at spin (high RPM) Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: WF330ANB/XAA 01	Brand: Samsung	Age: 5 - 10 years
Previous Topic Next Topic

brobriffin		#11 Posted : Friday, June 9, 2017 7:40:29 AM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Your outer bearing looks to be in great shape BTW.....
		WWW
User Profile View All Posts by User View Thanks

Kovachbt		#12 Posted : Sunday, June 11, 2017 12:28:17 PM(UTC)
Rank: Member Groups: Registered Joined: 5/31/2017(UTC) Posts: 19		Question...I can't believe I unloosened this clapand lost the nut. I couldn't find this under the clamps and I cannot find locally....yet. Other clamps will not holt the tube in place. This comes from the tub to a drain hose Pic attached Thank you Kovachbt attached the following image(s):
User Profile View All Posts by User View Thanks

brobriffin		#13 Posted : Sunday, June 11, 2017 3:30:18 PM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Would a screw type clamp work like you could get at auto parts store?
		WWW
User Profile View All Posts by User View Thanks

brobriffin		#14 Posted : Sunday, June 11, 2017 3:37:33 PM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		If your hunting clamps I must imagine you've removed and fixed the support arm?
		WWW
User Profile View All Posts by User View Thanks

Kovachbt		#15 Posted : Sunday, June 11, 2017 4:01:54 PM(UTC)
Rank: Member Groups: Registered Joined: 5/31/2017(UTC) Posts: 19		Yep.... the tub to pump hose is the only thing that remains. I've tried zip ties regular screw clamp but nothing holds the hose. It keeps slipping off Was hoping it could get through the site. Going to look at some local repair center tomorrow Anxious to see if the washer is fixed.... let alone do laundry Thanks for all your help
User Profile View All Posts by User View Thanks

brobriffin		#16 Posted : Sunday, June 11, 2017 5:08:34 PM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		http://www.appliancepartspros.c...65-00014a-ap4206370.html this is the part # of the clamp you seek
		WWW
User Profile View All Posts by User View Thanks

Kovachbt		#17 Posted : Wednesday, June 14, 2017 1:14:28 PM(UTC)
Rank: Member Groups: Registered Joined: 5/31/2017(UTC) Posts: 19		Wish I was writing with good news Washer is together and taking it for a test run on spin cycle. Tub fills up and it seems to want to spin but doesn't... tub rocks minimally and seems stuck in the cycle Not sure what to do expect go back thru and verify all the connections Could I not have the magnet and stator on completely?
User Profile View All Posts by User View Thanks

Kovachbt		#18 Posted : Wednesday, June 14, 2017 1:23:55 PM(UTC)
Rank: Member Groups: Registered Joined: 5/31/2017(UTC) Posts: 19		Ok.... went back and shook the tub / manually spun it. Ran the rise cycle and it actually spun for a few rotations and froze back up.
User Profile View All Posts by User View Thanks

brobriffin		#19 Posted : Wednesday, June 14, 2017 2:28:09 PM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Check all wiring connections. Remove rotor and check for proper stator placement. Check wiring to stator, it has a rotor position sensor. Replace rotor making sure it is completely seated over stator. recheck a rinse and spin cycle
		WWW
User Profile View All Posts by User View Thanks

Kovachbt		#20 Posted : Thursday, June 15, 2017 4:09:39 AM(UTC)
Rank: Member Groups: Registered Joined: 5/31/2017(UTC) Posts: 19		Good morning Sending you this attachment.... is this normal that the shaft is not flush with the housing? Could this be my issue? Thank you Kovachbt attached the following image(s):
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (7)

4 Pages<1234> Go to Page...