Rank: Member
Groups: Registered
Joined: 1/28/2011(UTC) Posts: 1
|
this oven wont ignite the range burners are ok
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Does the igniter (#14 on the diagram) glow? If it does then most likely the igniter itself is too weak to open the gas valve and has to be replaced. If it does not, then you have to check if there is 120 VAC to the igniter while the oven thermostat calls for Bake and post the results. - The igniter Part number: AP4012072
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/1/2014(UTC) Posts: 2
|
Is this true even if the igniter glows? Our igniter comes on but the valve doesn't open.
Thanks.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/1/2014(UTC) Posts: 2
|
Originally Posted by: Kendall4570 Is this true even if the igniter glows? Our igniter comes on but the valve doesn't open.
Thanks. And if this is the case, what is the part number for this igniter?
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close