Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
No voltage to soap dispenser actuator
Options
Go to last post Go to first unread
Model: GHDA690PBB Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
Waynebo64  
#1 Posted : Thursday, January 10, 2013 8:41:56 AM(UTC)
Waynebo64

Rank: Member

Groups: Registered
Joined: 1/10/2013(UTC)
Posts: 4
Tested the soap dispenser actuator and it tested good. Ran a complete cycle with a volt meter hooked up to soap dispenser actuator wires and did not get any voltage. Not sure if this is a control board problem.

Any advice would be appreciated

Wayne
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Simon / APP Team  
#2 Posted : Thursday, January 10, 2013 11:37:46 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

If you are not getting 120VAC to the dispenser - replace the control board Part number: WD21X10366
Part number: WD21X10366


Here are the breakdown diagrams and Escutcheon & Door Assembly parts for GE GHDA690P00BB - AppliancePartsPros.com

Post the results.

Simon.
Back to top
Waynebo64  
#3 Posted : Thursday, January 10, 2013 1:22:59 PM(UTC)
Waynebo64

Rank: Member

Groups: Registered
Joined: 1/10/2013(UTC)
Posts: 4
Thank you. I will order it then post how it goes.
Back to top
Simon / APP Team  
#4 Posted : Thursday, January 10, 2013 2:20:23 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
You are welcome.

Simon.
Back to top
Waynebo64  
#5 Posted : Monday, January 14, 2013 5:31:31 PM(UTC)
Waynebo64

Rank: Member

Groups: Registered
Joined: 1/10/2013(UTC)
Posts: 4
Installed new control panel. Dishwasher now performs like new.
Back to top
Simon / APP Team  
#6 Posted : Monday, January 14, 2013 7:46:38 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Congratulations on the good job.

Simon.
Back to top
Waynebo64  
#7 Posted : Wednesday, January 16, 2013 7:49:19 AM(UTC)
Waynebo64

Rank: Member

Groups: Registered
Joined: 1/10/2013(UTC)
Posts: 4
Hey Simon,

I hate to bother you again but my soap door is still not opening. Worked the first time but not since. I ran the cycle again with the volt meter hooked up and it is getting 120 volts to the actuator but for only 1 minute on a stop watch. When I test the soap door hooked directly to 120 volts it takes 1 minute 22 seconds for the actuator to open the door. Is this a normal time for the actuator to work and should I be getting voltage to it for more than 1 minute?

Thanks Wayne
Back to top
Simon / APP Team  
#8 Posted : Wednesday, January 16, 2013 11:15:52 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

Checked all possible sources with no luck.Nobody mentions for how long the wax motor is energized.
You should replace the dispenser

Part number: WD12X10220
Part number: WD12X10220


and return the control board back if you got it from APP.

Thank you.

Simon.
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET