Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Still no heat
Options
Go to last post Go to first unread
Model: DV231AEW/XAA Brand: Samsung Age: 1 - 5 years
Previous Topic Next Topic
Frits6  
#1 Posted : Monday, December 17, 2012 4:15:29 PM(UTC)
Frits6

Rank: Member

Groups: Registered
Joined: 12/17/2012(UTC)
Posts: 2
Dryer will tumble without heat. The first time I found that the high limit thermostat had melted and i replaced it. I got heat for a few minutes then cold air. I just now replaced the high limit and the low limit (?) thermostat with the hope that this would do it...nope. The high limit had no connectivity either time. The low limit did but I thought maybe it had malfunctioned anyway. So I am out of ideas. The ducts are clear. Any ideas?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Tuesday, December 18, 2012 1:30:13 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Did it show any error code?

How did you know that the vents are clean and the air flow is not obstructed?

Gene.
Back to top
Frits6  
#3 Posted : Tuesday, December 18, 2012 2:12:44 PM(UTC)
Frits6

Rank: Member

Groups: Registered
Joined: 12/17/2012(UTC)
Posts: 2
No sir. No error codes. When I replaced the thermostats i checked to see that hot air was blowing through the duct work. Didn't seem to be a problem.
Back to top
Gene  
#4 Posted : Tuesday, December 18, 2012 3:07:20 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Run the temperature test as instructed in the attached file (page 5) with the vent hose still connected to the dryer and with the vent hose disconnected from the dryer and post the results.

Gene.
File Attachment(s):
Samsung-Dryer-DV2x - 3x - Fast-track.pdf (886kb) downloaded 2 time(s).
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Replaced oven element in 7 year old Whirlpool stove and still no heat (Oven Repair (including Ranges and Cooktops))
by Guest 4/14/2021 2:34:36 PM(UTC)
Replaced oven element and still no heat (Oven Repair (including Ranges and Cooktops))
by Guest 4/14/2021 2:32:26 PM(UTC)
All parts have continuity still no heat (Dryer Repair)
by Goineson 12/9/2017 9:29:35 PM(UTC)
All parts have continuity still no heat (Dryer Repair)
by Goineson 12/9/2017 9:28:56 PM(UTC)
Replaced/tested everything - still no heat - (Dryer Repair)
by Snug Harbor 2/23/2015 7:29:12 AM(UTC)
Checked thermo stats, power source, heating element, still no heat (Oven Repair (including Ranges and Cooktops))
by rickortenblad 4/15/2014 9:10:58 AM(UTC)
Replaced Temp sensor, still no heat (Oven Repair (including Ranges and Cooktops))
by Hypnocrip 2/21/2014 12:34:27 AM(UTC)
GE Replaced Gas Valve Coils - Still no heat (Dryer Repair)
by ScottKr 8/10/2013 10:55:48 AM(UTC)
Replaced heating element and still no heat. (Dryer Repair)
by freqflyer 5/17/2013 7:53:48 AM(UTC)
still no heat (Dryer Repair)
by uncledale1031 4/2/2013 10:54:57 AM(UTC)
replace element and tested everything still no heatzs (Oven Repair (including Ranges and Cooktops))
by grmbmg 4/12/2012 9:05:13 PM(UTC)
New Parts and still no Heat!!!! (Dryer Repair)
by larosa00 10/29/2011 5:37:59 PM(UTC)
Everything checking out still no heat? (Dryer Repair)
by max32111 7/10/2011 9:16:57 AM(UTC)
After changing magnatron and diode still no heat (Microwave Repair)
by Srizvi5 4/3/2011 6:05:12 PM(UTC)
Tappan range oven burnt element/replaced/ still no heat (Oven Repair (including Ranges and Cooktops))
by bandit571 2/11/2011 12:56:41 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET