Rank: Member
Groups: Registered
Joined: 11/24/2012(UTC) Posts: 5
|
Hi my frezer is not cooling, i check compresor and fan is woorking, compresor is hot. Please let me now what next i should check, thank You
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 10/21/2012(UTC) Posts: 263
|
Unplug the machine and remove the start device from the side of the compressor and shake it. If it rattles or starts to fall apart in your hands, it's bad and needs to be replaced.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/24/2012(UTC) Posts: 5
|
I checked, looks like new, i plug fridge again to power and main board click, compresor and fan starts, but i notice main board make some noise, also Inside fridge fan is not run i think
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/24/2012(UTC) Posts: 5
|
Compresor is very hot but work
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/24/2012(UTC) Posts: 5
|
I notice ice built on the evaporator coils. What i should check now? Opened up back panel tonight to check on defrost system. Disconnected defrost heater at both ends and checked continuity accross it. Measured 23 ohms.
Next checked defrost thermostat it was 10 ohms
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 10/21/2012(UTC) Posts: 263
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/24/2012(UTC) Posts: 5
|
thank you, i just order this part i let you now if works, thx
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close