KitchenAid refrigerator not making Ice Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: KSRS25RVMSO2	Brand: Kitchen Aid	Age: 1 - 5 years
Previous Topic Next Topic

pogibugoy		#1 Posted : Monday, October 29, 2012 7:43:43 PM(UTC)
Rank: Member Groups: Registered Joined: 10/29/2012(UTC) Posts: 4		KitchenAid refrigerator stopped making ice, water dispenser is fine. replaced inlet water valve, still same problem. any idea what might be wrong?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Tuesday, October 30, 2012 12:41:14 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Open the freezer door. Make sure the "on-off" switch on the right side is On. Close the flapper door on the left side to clean the optic beam and observe the LED on the right side. Post the result. Here are the breakdown diagrams and Parts for Whirlpool KSRS25RVMS02 Refrigerator - AppliancePartsPros.com Gene.
User Profile View All Posts by User View Thanks

pogibugoy		#3 Posted : Tuesday, October 30, 2012 6:26:09 PM(UTC)
Rank: Member Groups: Registered Joined: 10/29/2012(UTC) Posts: 4		Did everything per your suggestion, nothing happened. Is the red flashing light suppose to turn green?
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Wednesday, October 31, 2012 1:12:21 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		No, but it can be steady on, blinking or completely off. I need to know its status. Gene.
User Profile View All Posts by User View Thanks

pogibugoy		#5 Posted : Wednesday, October 31, 2012 1:19:52 PM(UTC)
Rank: Member Groups: Registered Joined: 10/29/2012(UTC) Posts: 4		light was completely off, no blinking or steady
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Wednesday, October 31, 2012 5:03:02 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		I hope you did not touch the door light switch? If that's correct, then replace the optic boards on both sides. - The PC boards kit Part number: 4389102 Gene.
User Profile View All Posts by User View Thanks

pogibugoy		#7 Posted : Thursday, November 1, 2012 12:28:36 PM(UTC)
Rank: Member Groups: Registered Joined: 10/29/2012(UTC) Posts: 4		light is still off but for some unknown reason, it started making ice again. Thanks anyway Gene for your pront response.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)