Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
larryvon  
#1 Posted : Thursday, April 9, 2009 2:55:04 PM(UTC)
larryvon

Rank: Member

Groups: Registered
Joined: 4/9/2009(UTC)
Posts: 2

I think I need a fuseable thermostat (repair guy said that is problem...part is no longer available) part # AP2919741 Whirlpool # ...or alternate way to make machine work.

THX
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Friday, April 10, 2009 3:01:41 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here is a tech sheet

https://www.servicematters.com/d...0Sheet%20-%209742248.pdf

Unless the tech actually measured it and found it blown I would not trust an over the phone diagnosis. Measure it with a meter should be 0 ohms at room temperature.
Also check the heater, should be around 15 ohms.

Remove it from the machine and post any numbers you can get off of it perhaps someone can cross match it. A magnifying glass can help read them.
THIS FORUM IS DEAD!!!!!!!
larryvon  
#3 Posted : Friday, April 10, 2009 5:37:36 AM(UTC)
larryvon

Rank: Member

Groups: Registered
Joined: 4/9/2009(UTC)
Posts: 2

THX...it is blown...I have posted the part #...is there any way to wire around this? or an alternate part?
denman  
#4 Posted : Friday, April 10, 2009 5:48:45 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Are there no other numbers on the fuse.
I cannot even try to cross it without this info.

Kitchenaide does not make the fuses and there should be manufacture's numbers on it.

This is a safety device so must be replaced.

Perhaps someone else has a solution.
THIS FORUM IS DEAD!!!!!!!
Chuck Forman  
#5 Posted : Sunday, November 1, 2009 11:35:48 AM(UTC)
Chuck Forman

Rank: Member

Groups: Registered
Joined: 11/1/2009(UTC)
Posts: 1

Need this part. Did you find a workable substitute?
denman  
#6 Posted : Monday, November 2, 2009 1:31:39 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Without manufacturer's numbers off the thermostat I cannot find any tech info on it.

You may want to contact the parts people at AppliancePartsPros, perhaps they can help.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (3)
Similar Topics
Frigidaire Dishwasher Help (Dishwasher Repair)
by hharper1321 8/25/2013 9:23:23 AM(UTC)
Dishwasher help (Dishwasher Repair)
by redruby123 7/8/2013 7:33:06 PM(UTC)
2010 Maytag dishwasher help (Dishwasher Repair)
by mchugh78 5/22/2012 3:33:12 PM(UTC)
Admiral Dishwasher Help (Dishwasher Repair)
by Peasaint 1/5/2012 4:19:00 PM(UTC)
Dishwasher Help Please (Dishwasher Repair)
by Dsamora 11/20/2011 4:48:06 AM(UTC)
Will not turn on. maytag dishwasher help (Dishwasher Repair)
by cowboydadx4 6/4/2011 2:29:18 PM(UTC)
maytag dishwasher help (Dishwasher Repair)
by cottonmink 5/14/2011 5:17:52 PM(UTC)
Whirlpool Dishwasher help (Dishwasher Repair)
by jefro 4/5/2011 3:00:26 PM(UTC)
Whirlpool Gold Dishwasher Help (Dishwasher Repair)
by mrguttz 12/28/2010 12:30:54 PM(UTC)
GE Profile Dishwasher HELP (Dishwasher Repair)
by DirtyDirt 10/11/2010 4:23:14 PM(UTC)
dishwasher help needed (Dishwasher Repair)
by krazed123 10/22/2009 1:49:02 PM(UTC)
dishwasher help (Dishwasher Repair)
by svjain1972 5/28/2009 9:52:17 AM(UTC)
Maytag Dishwasher Help (Dishwasher Repair)
by tjcin 4/28/2009 4:04:42 PM(UTC)
Whirlpool Dishwasher help (Dishwasher Repair)
by natasha377 3/27/2009 5:49:24 AM(UTC)
dishwasher help (Dishwasher Repair)
by JRM 12/7/2008 6:05:54 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.