Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
3 Pages<123>
Roper Element replacement
Options
Go to last post Go to first unread
Model: RES7648EQ2 Brand: Roper Age: 5 - 10 years
Previous Topic Next Topic
Monster Rain  
#11 Posted : Monday, October 22, 2012 9:38:09 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
-OK, No voltage through element while set to heat.
-continuity good for operating thermo and hi-limit thermo
-What I THINK is the thermal cutoff(connected to a red and red-white striped wire isolated in the middle of the back of the dryer), and I think the schematic indicates it as that as well, has no continuity. Is that the right part, or should I proceed to the panel wiring?
Back to top
Monster Rain  
#12 Posted : Monday, October 22, 2012 9:58:05 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
-OK, No voltage through element while set to heat.
-continuity good for operating thermo and hi-limit thermo
-What I THINK is the thermal cutoff(connected to a red and red-white striped wire isolated in the middle of the back of the dryer), and I think the schematic indicates it as that as well, has no continuity. Is that the right part, or should I proceed to the panel wiring?
Back to top
Monster Rain  
#13 Posted : Monday, October 22, 2012 10:00:02 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
Sorry for the double-post.
Back to top
Simon / APP Team  
#14 Posted : Monday, October 22, 2012 10:35:59 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

Replace the the thermal cut off kit Part number: 279816
Part number: 279816


Simon.
Back to top
Monster Rain  
#15 Posted : Monday, October 22, 2012 11:01:53 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
Thanks again!!!
Back to top
Simon / APP Team  
#16 Posted : Monday, October 22, 2012 12:21:01 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
You are welcome.

Post the results.

Simon.
Back to top
Monster Rain  
#17 Posted : Monday, October 22, 2012 3:48:08 PM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
Will do. I'm assuming it would be pretty stupid to bypass the cut-off in the meantime?
Back to top
Simon / APP Team  
#18 Posted : Tuesday, October 23, 2012 8:28:40 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
HI.

Only to test the dryer. Also, check the venting for any restrictions.

Simon.
Back to top
Monster Rain  
#19 Posted : Tuesday, October 23, 2012 8:31:02 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
Works fine when bypassed. Venting is unobstructed. Will post results in the next couple of days.
Back to top
Monster Rain  
#20 Posted : Wednesday, October 24, 2012 4:59:29 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
I purchased and installed the thermal cut-off/thermostat kit and now it works like new! Can't thank you enough, man. I was gonna replace the damn thing.
Back to top
Users browsing this topic
Similar Topics
Roper Element replacement (Dryer Repair)
by Monster Rain 10/11/2012 3:39:01 AM(UTC)
3 Pages<123>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET