Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
3 Pages123>
Roper Element replacement
Options
Go to last post Go to first unread
Model: RES7648EQ2 Brand: Roper Age: 5 - 10 years
Previous Topic Next Topic
Monster Rain  
#1 Posted : Thursday, October 11, 2012 3:38:59 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
Hey, guys. My Roper, Model RES7648EQ2 just stopped heating up. Should I just assume that it's the heating element, and can you point me in the direction of a good troubleshooting/walkthrough?

Thanks so much in advance.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Monster Rain  
#2 Posted : Thursday, October 11, 2012 6:51:04 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
Well, I tested the thermal fuse, which was fine, and my element had read 9 on the losest setting of resistance. My high-level thermostat is fine, too. I guess I'll check the cycling thermostat, but I don't like the way this is going...
Back to top
Monster Rain  
#3 Posted : Thursday, October 11, 2012 7:34:14 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
Cycling thermostat is fine. Anyone have any ideas?
Back to top
Simon / APP Team  
#4 Posted : Thursday, October 11, 2012 11:34:18 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Have you checked if there is 240VAC to the dryer?

Simon.
Back to top
Monster Rain  
#5 Posted : Friday, October 12, 2012 8:51:46 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
No, but I'm not sure how. I'll google it. Thanks a lot!
Back to top
Simon / APP Team  
#6 Posted : Friday, October 12, 2012 10:27:25 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
You are welcome.

Simon.
Back to top
Monster Rain  
#7 Posted : Sunday, October 21, 2012 2:23:35 PM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
Yes, it's 240VAC. It's not making any damn sense...I noticed, though, that it shuts off when you turn it to the end part of the auto-dry cycle.
Back to top
Monster Rain  
#8 Posted : Monday, October 22, 2012 5:58:32 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
Sorry, I meant that it is getting the proper voltage, like 249.

And it shuts off at the wrinkle prevent of the auto-sense dry cycle. This is infuriating.
Back to top
Simon / APP Team  
#9 Posted : Monday, October 22, 2012 8:33:19 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

Here what you need to do:
- with dryer turned to heat check if there is 240VAC across the heating element (if yes - replace it)
- with unit unplugged check continuity of the thermal cutoff, operating thermostat, hi-limit thermostat (replace if needed).
-with unit unplugged open the control panel, set the timer to Timed-regular and check continuity TM-OR,BK-R,T-W.
- If everything checks out OK then most likely the motor switch contacts 1M-2M not closing.

Here are the breakdown diagrams and Bulkhead parts for Roper RES7648EQ2 - AppliancePartsPros.com

Post the results.

Simon.
Back to top
Monster Rain  
#10 Posted : Monday, October 22, 2012 8:47:22 AM(UTC)
Monster Rain

Rank: Member

Groups: Registered
Joined: 10/11/2012(UTC)
Posts: 15
Thanks again, will post asap.
Back to top
Users browsing this topic
Guest (6)
Similar Topics
Roper Element replacement (Dryer Repair)
by Monster Rain 10/11/2012 3:39:01 AM(UTC)
3 Pages123>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET