Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

12 Pages«<7891011>»
Options
Go to last post Go to first unread
Gene  
#81 Posted : Wednesday, October 26, 2011 10:19:08 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Michael,

Here are the breakdown diagrams and Replacement parts for JENN-AIR JEC9536ADS SURFACE UNIT- ELE | AppliancePartsPros.com

Here is the wiring diagram.

You have to check the switch in both, on & off, positions.

Gene.
PAPAERICK  
#82 Posted : Saturday, November 12, 2011 6:59:05 PM(UTC)
PAPAERICK

Rank: Member

Groups: Registered
Joined: 11/12/2011(UTC)
Posts: 1

i have an G.E. Dryer model dde5900ralwh.4 cycle, but can't dry the clothes.run a normal cycle.but no heat. i check the rear heater elements it should be 19.0 ohms....and the one thermostat front of the cabinet show 00.4 ohms...the other in back show too 00.4 ohms.but i don't now what is the range to know if are good or bad. and have another with this numbers L310-100f and show 00.6 ohms in the scale of 200ohms im my multimeter..can somebody help me to fix this i am car mechanic.im trying fix me dryer too. im appreciate any help,thanks
Gene  
#83 Posted : Monday, November 14, 2011 12:50:36 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Remove the terminal block cover on the back of the dryer. Measure the voltage between the Black & White and Red & White wires at the terminal block. The normal reading should be about 120 VAC. Then measure the voltage between the Black & Red wires. The reading should be about 240 VAC. Post the results.

Here are the breakdown diagrams and Replacement parts for General Electric DDE5900RAL Electric dryer | AppliancePartsPros.com

Gene.
salsaman  
#84 Posted : Thursday, November 17, 2011 7:48:32 AM(UTC)
salsaman

Rank: Member

Groups: Registered
Joined: 11/17/2011(UTC)
Posts: 1

pretty much but would like to find thread that shows me how to follow the problem
Raul Campos  
#85 Posted : Thursday, February 2, 2012 5:49:33 PM(UTC)
Raul Campos

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 3

:confused:hello someone could help me pls. I got a kitchen aid refrigerator that ice maker is working properly but It is not dispensing water neither ice.around two years ago somebody did work on the wires that are placed under the freezer door I checked them up they look well attached but I don't how many volts are suppose to come out from these wires ,
Raul Campos  
#86 Posted : Friday, February 3, 2012 2:30:24 AM(UTC)
Raul Campos

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 3

:confused:hello someone could help me pls. I got a kitchen aid refrigerator that ice maker is working properly but It is not dispensing water neither ice.around two years ago somebody did work on the wires that are placed under the freezer door I checked them up they look well attached but I don't how many volts are suppose to come out from these wires ,
Gene  
#87 Posted : Friday, February 3, 2012 4:19:26 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Raul,

Would like to suggest, you start your own thread in the Refrigerator Repair section, using Post New Topic. Do not forget to post the complete model number of the refrigerator.

People will then see it is someone with a problem.

This should increase your odds of getting a relevant reply.

Gene.
huxleyn  
#88 Posted : Saturday, May 19, 2012 5:42:59 AM(UTC)
huxleyn

Rank: Member

Groups: Registered
Joined: 5/17/2012(UTC)
Posts: 1

Yes. Very.

Huxleyn
huxleyn  
#89 Posted : Saturday, May 19, 2012 5:45:29 AM(UTC)
huxleyn

Rank: Member

Groups: Registered
Joined: 5/17/2012(UTC)
Posts: 1

Yes. Very.

Huxleyn
jbarbero  
#90 Posted : Friday, June 8, 2012 11:18:20 AM(UTC)
jbarbero

Rank: Member

Groups: Registered
Joined: 6/7/2012(UTC)
Posts: 10

Do these ohm tests apply to the damper control on my fridge?
Frigidaire model # Frs23bh6cs0
Another forum member is pointing me in the direction of a new damper control part # 241600902. I would like to test it just to make sure it really is the problem.
Thanks
Users browsing this topic
Guest (4)
12 Pages«<7891011>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.