8 Pages«<5678> Go to Page...

Dead! Kenmore Elite -Advantium 120 Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: 363.6369	Brand: Kenmore	Age: 1 - 5 years
Previous Topic Next Topic

ChicagoMicro		#61 Posted : Tuesday, February 7, 2012 5:12:09 PM(UTC)
Rank: Member Groups: Registered Joined: 2/7/2012(UTC) Posts: 4		Model # 36363693302
User Profile View All Posts by User View Thanks

ChicagoMicro		#62 Posted : Tuesday, February 7, 2012 5:19:26 PM(UTC)
Rank: Member Groups: Registered Joined: 2/7/2012(UTC) Posts: 4		36363693302
User Profile View All Posts by User View Thanks

Gene		#63 Posted : Tuesday, February 7, 2012 6:46:21 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		This is Kenmore model number and I can not find any documentations for their products. Besides the TCO there suppose to be a regular in line fuse. Did you check it? Gene.
User Profile View All Posts by User View Thanks

ChicagoMicro		#64 Posted : Tuesday, February 7, 2012 6:58:20 PM(UTC)
Rank: Member Groups: Registered Joined: 2/7/2012(UTC) Posts: 4		Fuses good. I have power and to the first board. After that no power makes me think main board. For the costs and the gamble not knowing if that's the exact issue might just replace.
User Profile View All Posts by User View Thanks

darylnj		#65 Posted : Tuesday, May 8, 2012 7:18:00 AM(UTC)
Rank: Member Groups: Registered Joined: 5/8/2012(UTC) Posts: 5		been reading along with this post my oven just died it's blank sca1001hss 03 checked for 120 volts to the cn1 terminals on the main board no voltage does this mean the board is bad? theres 120v to the top board fuse
User Profile View All Posts by User View Thanks

Gene		#66 Posted : Wednesday, May 9, 2012 3:03:48 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: darylnj ...checked for 120 volts to the cn1 terminals on the main board... How did you do it? Gene.
User Profile View All Posts by User View Thanks

darylnj		#67 Posted : Thursday, May 10, 2012 2:58:06 AM(UTC)
Rank: Member Groups: Registered Joined: 5/8/2012(UTC) Posts: 5		found a burnt plug on the top feeding the sensor,on the left side this oven gets very hot
User Profile View All Posts by User View Thanks

Gene		#68 Posted : Monday, May 14, 2012 1:46:18 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Can you refer to the diagrams reference numbers please? Here are the breakdown diagrams and Replacement parts for General Electric SCA1001HSS03 Counter top microwave | AppliancePartsPros.com Gene.
User Profile View All Posts by User View Thanks

darylnj		#69 Posted : Monday, May 14, 2012 1:59:17 PM(UTC)
Rank: Member Groups: Registered Joined: 5/8/2012(UTC) Posts: 5		theres 3 wires 2 red 1 black that go to the tco #1430 with a white plastic connector the plastic connector melted
User Profile View All Posts by User View Thanks

Gene		#70 Posted : Monday, May 14, 2012 4:20:13 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You have to replace the TCO and fix the wires. The two red wires should go to one terminal while the black goes to the second terminal. - The cavity TCO Part number: WB21X10046 Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)

8 Pages«<5678> Go to Page...