Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

29 Pages«<1617181920>»
Options
Go to last post Go to first unread
Gene  
#171 Posted : Monday, December 12, 2011 3:13:41 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Sam,

I would remove the oven from the cabinet and start the troubleshooting from the junction box, checking all wires and devices for continuity from the junction box to the control board.

Gene.
semloh314  
#172 Posted : Tuesday, December 13, 2011 5:09:16 PM(UTC)
semloh314

Rank: Member

Groups: Registered
Joined: 9/25/2011(UTC)
Posts: 3

Hi Gene,

ok will do, and will let you know what I find in that junction box.

(yes - oven is out of the cabinet, sitting on the kitchen floor) :)

Your help is greatly appreciated!

-Sam
semloh314  
#173 Posted : Tuesday, December 20, 2011 10:01:03 AM(UTC)
semloh314

Rank: Member

Groups: Registered
Joined: 9/25/2011(UTC)
Posts: 3

Hi Gene,

you nailed it -- black wires in the junction box were BBQ-cooked...
should have known that the pop and smell of burning plastic, were in that box. the wire nut on the black, was almost completely melted.
white wires also suffered some collateral damage.

thank you! thank you! thank you! for your support!

The breaker is fine, re-packed everything on the oven and we're good to go!

and kudos to Mrs. semloh314 for being so patient without an oven for so long. we're back in business .. first meal, cooked a frozen pizza for the kids.

Sam
Gene  
#174 Posted : Tuesday, December 20, 2011 11:24:38 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome Sam. I'm glad it's up and running.

Happy Holidays!

Gene.
inspectorguy  
#175 Posted : Monday, January 30, 2012 1:39:39 PM(UTC)
inspectorguy

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 1

Hey Gene,
I also got the E6 F2 error, had a technician from A&E come out, he told me it was the panel and showed me how to replace it. I ordered the panel, installed it, and am still getting a blank panel display. What next? thanks, doug
Gene  
#176 Posted : Thursday, February 2, 2012 2:07:27 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Doug,

If the display is blank then it has nothing to do with the panel. Most likely the problem is a bad control board or power source for the control board, depends on model.

Gene.
Fletch54  
#177 Posted : Tuesday, February 7, 2012 7:02:33 AM(UTC)
Fletch54

Rank: Member

Groups: Registered
Joined: 2/7/2012(UTC)
Posts: 3

Hey Gene,

I have a Whirlpool GBD307PD that went blank the other night. I heard two beeps and then the display went blank. I haven not received and error code or anything. I have turned off the power over night and still the display is blank. When I select the upper or lower oven button I get the four beeps and then nothing happens. The question is do I need to replace the control panel or the control board? If I have to replace the control board ($$$) do you have any referals to where I can purchase the board? Is this something I can replace myself or is it complicated?

Any help you can give me would be appreciated.

Thank you.
Fletch54  
#178 Posted : Tuesday, February 7, 2012 7:33:04 AM(UTC)
Fletch54

Rank: Member

Groups: Registered
Joined: 2/7/2012(UTC)
Posts: 3

Hey Gene,

I have a Whirlpool GBD307PD that went blank the other night. I heard two beeps and then the display went blank. I haven not received and error code or anything. I have turned off the power over night and still the display is blank. When I select the upper or lower oven button I get the four beeps and then nothing happens. The question is do I need to replace the control panel or the control board? If I have to replace the control board ($$$) do you have any referals to where I can purchase the board? Is this something I can replace myself or is it complicated?

Any help you can give me would be appreciated.

Thank you.
Gene  
#179 Posted : Tuesday, February 7, 2012 1:06:13 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
More likely the problem is a bad control board but to verify it I need the complete model number of the oven. The model number you posted is incomplete.

Gene.
Fletch54  
#180 Posted : Wednesday, February 8, 2012 5:26:15 AM(UTC)
Fletch54

Rank: Member

Groups: Registered
Joined: 2/7/2012(UTC)
Posts: 3

Originally Posted by: Gene Go to Quoted Post
More likely the problem is a bad control board but to verify it I need the complete model number of the oven. The model number you posted is incomplete.

Gene.


Gene I had a repair man come and troubleshoot just to verify what part it is that needs replaced. He couldn't find the model number, but he did find out the panel had enough power to it and that it is a bad control board. They are on back order due to the Sanami that hit Japan, so I will have to see if I can find a used one.

Thank you for getting back with me.
Users browsing this topic
Guest (9)
Similar Topics
Whirlpool fault code E6 F2 (Oven Repair (including Ranges and Cooktops))
by msdabbert 11/26/2009 8:21:35 PM(UTC)
29 Pages«<1617181920>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.