maytag will not spin agitate or pump - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

maytag will not spin agitate or pump Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: PAV5158A	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

drembo		#1 Posted : Saturday, November 3, 2007 11:27:04 AM(UTC)
Rank: Member Groups: Registered Joined: 11/3/2007(UTC) Posts: 4		Our washer stopped in the middle of a cycle. Tub is full of water. When setting the timer any where in the cycle, the washer makes some grinding type noises, and then the overload protection turns the thing off. The tub seems to spin freely by hand. Pump, agitator, and spin will not work.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fixxit		#2 Posted : Saturday, November 3, 2007 12:26:35 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/25/2007(UTC) Posts: 68		quite likely you have a pump that is frozen. relizing your tub is half full you might want to use a pail or wet dry shop vac to empty as much water out of it as you can. then tilt it back and see if the pump is free. try not to run it much or you will burn the motor out. part # for the pump if it is the pump is AP3447809. good luck and post your results here


User Profile View All Posts by User View Thanks

drembo		#3 Posted : Saturday, November 3, 2007 2:49:41 PM(UTC)
Rank: Member Groups: Registered Joined: 11/3/2007(UTC) Posts: 4		You are correct, sir!! It was/is the pump


User Profile View All Posts by User View Thanks

slofeet		#4 Posted : Monday, December 24, 2007 4:47:01 PM(UTC)
Rank: Member Groups: Registered Joined: 12/24/2007(UTC) Posts: 4		washer fills up with water won't drain out and makes humming noise


User Profile View All Posts by User View Thanks

slofeet		#5 Posted : Monday, December 24, 2007 4:47:41 PM(UTC)
Rank: Member Groups: Registered Joined: 12/24/2007(UTC) Posts: 4		Please click one of the Quick Reply icons in the posts above to activate Quick Reply.


User Profile View All Posts by User View Thanks

slofeet		#6 Posted : Monday, December 24, 2007 4:55:27 PM(UTC)
Rank: Member Groups: Registered Joined: 12/24/2007(UTC) Posts: 4		how do you know if the washer is frozen? and how can i fix it the washer will turn on and sometimes spin and makes a humming noise but will not drain water at all.


User Profile View All Posts by User View Thanks

slofeet		#7 Posted : Monday, December 24, 2007 5:08:27 PM(UTC)
Rank: Member Groups: Registered Joined: 12/24/2007(UTC) Posts: 4		you are crazy


User Profile View All Posts by User View Thanks

richappy		#8 Posted : Tuesday, December 25, 2007 1:37:36 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Uh, drain the washer and check!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close