Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
G.E. Refrigerator ice and water dispensers
Options
Go to last post Go to first unread
Model: PSS26SGRESS Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
gtkeith  
#1 Posted : Saturday, December 6, 2008 4:21:39 PM(UTC)
gtkeith

Rank: Member

Groups: Registered
Joined: 12/6/2008(UTC)
Posts: 7
G.E. refrigerator PSS26SGRESS makes ice cubes but does't dispense them and the water stop dispensing through the door? I pulled off the hose at the bottom of the door and pushed the water dispenser and nothing I also changed the filter. Any help would be greatly appreciated
Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
abadfish66  
#2 Posted : Saturday, December 6, 2008 7:59:08 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
Do the lights on the display dim when trying to get ice or water? If so, you need a new main control board.
Back to top
gtkeith  
#3 Posted : Sunday, December 7, 2008 6:59:05 AM(UTC)
gtkeith

Rank: Member

Groups: Registered
Joined: 12/6/2008(UTC)
Posts: 7
the lights don't dim they go out when you push in on the dispenser arm
Thanks
Back to top
abadfish66  
#4 Posted : Sunday, December 7, 2008 2:40:21 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
You need a new main control board, Part# WR55x10656
Back to top
gtkeith  
#5 Posted : Sunday, December 7, 2008 2:55:33 PM(UTC)
gtkeith

Rank: Member

Groups: Registered
Joined: 12/6/2008(UTC)
Posts: 7
Thank-You for the information the more I am reading I am finding out they have several problems with these boards.
Back to top
rtelec  
#6 Posted : Monday, December 22, 2008 10:02:08 AM(UTC)
rtelec

Rank: Member

Groups: Registered
Joined: 12/22/2008(UTC)
Posts: 2
I have a G.E. Profile Arctica Refrigerator...model # PSS26MGTA BB and Serial # DL4256 14 is this also the control board I need? If not could you give me the correct part number.

Could you also include any trade secrets I may need for installation.

Thanks, R.T.
Back to top
rmcclellan  
#7 Posted : Tuesday, August 18, 2009 9:22:20 AM(UTC)
rmcclellan

Rank: Member

Groups: Registered
Joined: 8/18/2009(UTC)
Posts: 1
Where is the control board how to check it and how to get to it safely thanks rob
Back to top
rtelec  
#8 Posted : Tuesday, August 18, 2009 12:10:37 PM(UTC)
rtelec

Rank: Member

Groups: Registered
Joined: 12/22/2008(UTC)
Posts: 2
Originally Posted by: rmcclellan Go to Quoted Post
Where is the control board how to check it and how to get to it safely thanks rob


Rob, The control board is located in the rear of the fridge lower right hand side. The cover is held on by about 10 1/4 inch hex head screws. As far is I know there isn't a way to trouble shoot this board. It should only take about 15 minutes to change the board. I can now change a board in less then 10 minutes now, I have changed six boards so far; my neighbors and I moved in at the same time and the boards begin to fail about the same time.

Make sure the plug is pulled and the only tool you need is a quarter inch nut driver and maybe a sharpie to mark the connections.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET