Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Roper washer won't spin
Options
Go to last post Go to first unread
Model: RAL5144ALO Brand: Roper Age: 5 - 10 years
Previous Topic Next Topic
Ragwing  
#1 Posted : Monday, November 10, 2008 9:12:09 AM(UTC)
Ragwing

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 7
Roper RAL5144ALO washer won't spin. Water pumps out. Agitator turns slowly during spin cycle, can stop it with my hand.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Monday, November 10, 2008 9:26:29 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
The agitator turns or the tub is turning slowly?
Back to top
Ragwing  
#3 Posted : Monday, November 10, 2008 10:41:50 AM(UTC)
Ragwing

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 7
Agitator barely turns. Tub stays still.
Back to top
libertyappl  
#4 Posted : Monday, November 10, 2008 10:51:30 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Is it turning in the same direction or actually agitating back & forth?
Back to top
Ragwing  
#5 Posted : Monday, November 10, 2008 11:37:30 AM(UTC)
Ragwing

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 7
Turns clockwise. Very weak. Ratcheting motion. No discernable counter clockwise motion.
Back to top
richappy  
#6 Posted : Tuesday, November 11, 2008 1:30:22 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Pull the bolt off under the fabric softener, pull the agitator off, and verify the spindle does not agitate, if so, you have a bad transmission or a broken coupler.
Back to top
Ragwing  
#7 Posted : Tuesday, November 11, 2008 3:15:24 AM(UTC)
Ragwing

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 7
With the agitator off, the shaft turns clockwise. I can easily stop it with my fingers.
Back to top
Ragwing  
#8 Posted : Tuesday, November 11, 2008 4:33:19 AM(UTC)
Ragwing

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 7
I have removed the motor to inspect the coupler. It appears to be in good condition.
Back to top
Ragwing  
#9 Posted : Tuesday, November 11, 2008 5:01:36 AM(UTC)
Ragwing

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 7
Have noticed that there is what appears to be a clutch assembly on top of the gearbox. This assembly turns when the timer is set to the "spin" mode. So I assume that the gearbox is ok. Am guessing that perhaps some clutch parts are worn. Need to determine what parts to order.
Back to top
Ragwing  
#10 Posted : Tuesday, November 11, 2008 5:51:54 AM(UTC)
Ragwing

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 7
Have removed the gearbox. Noticed that the brake driver cam is broken. Will order a clutch assembly kit. p/n AP3094537
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Roper washer won't spin or drain (Washer Repair)
by diy4now 1/22/2012 6:08:35 AM(UTC)
roper washer won't spin (Washer Repair)
by Julie Rogers 4/23/2010 1:58:42 PM(UTC)
Roper washer won't spin (Washer Repair)
by alink 7/20/2008 4:08:42 PM(UTC)
Roper washer won't spin (Washer Repair)
by cheapster 3/12/2008 11:03:45 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET