Rank: Member
Groups: Registered
Joined: 10/23/2008(UTC)
Posts: 2
|
I have a model 106 626663 ice maker that just quit working. I removed the ice maker and there was frozen cubes in it. I re-installed the ice maker but it doesn't seem to be getting water. When I open the freezer door the led blinks twice, pauses and blinks twice again. This happens even when I hold the flapper down. If I hold the flapper down and the door switch down the LED doesn't blink at all. Any thoughts before I purchase a new ice maker.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
|
Open the freezer door, and squeeze the black hose that drops water into the ice maker. If it is hard it is frozen defrost it. If all is Ok, look at the fingers that drop the ice out, if they are looking at you, replace the emitter kit, if not replace the motor module on the icemaker. Tom ApplianceEducator.com
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/23/2008(UTC)
Posts: 2
|
Please click one of the Quick Reply icons in the posts above to activate Quick Reply.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
|
The 2 binks and a pause then repeat the blinks is telling you the optics are working fine.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
