No Heat Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LEC8858DZO	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

Gboyz		#1 Posted : Wednesday, October 10, 2007 12:26:01 AM(UTC)
Rank: Member Groups: Registered Joined: 10/10/2007(UTC) Posts: 3		Dryer runs but no heat generated, Changed heating element, still no change. Appreciate any help.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

richappy		#2 Posted : Wednesday, October 10, 2007 2:51:45 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Common failure items, thermal fuse, circuit breaker, burnt wire. Should have a meter to check things.
User Profile View All Posts by User View Thanks

Gboyz		#3 Posted : Wednesday, October 10, 2007 6:48:08 AM(UTC)
Rank: Member Groups: Registered Joined: 10/10/2007(UTC) Posts: 3		No burnt wires, did test power source to element and no power read.
User Profile View All Posts by User View Thanks

Pegi		#4 Posted : Wednesday, October 10, 2007 1:20:19 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/3/2007(UTC) Posts: 73		Check the cut-off fuse on the side of the heating element canister, the one above the safety thermostat....this is assuming you have 240 volts going to the dryer???
User Profile View All Posts by User View Thanks

Gboyz		#5 Posted : Wednesday, October 10, 2007 6:38:05 PM(UTC)
Rank: Member Groups: Registered Joined: 10/10/2007(UTC) Posts: 3		Yes, 240v is read. Is there a way to test the cut off fuse. I tested accross the fuse on the resistance scale and did not get a reading (open).
User Profile View All Posts by User View Thanks

richappy		#6 Posted : Thursday, October 11, 2007 12:56:14 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		That is your problem.These come as a kit with a safety thermostat. Thermostat is self-resettable and saves the fuse from blowing P # 279973 Check your dryer venting and remove clogs all the way to outside, they sell a 4 inch brush for this. Appliance parts pros should have the kit, just call.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)

Similar Topics

Cafe Dishwasher little to no heat, not cleaning dishes well. (Dishwasher Repair) by Jtaylor20 5/16/2024 10:15:38 AM(UTC)

Frigidaire gas dryer runs but no heat (Dryer Repair) by Guest 3/16/2024 11:27:14 AM(UTC)

no heat from oven or broiler (Oven Repair (including Ranges and Cooktops)) by lennyag 1/5/2024 1:41:07 PM(UTC)

Dryer loud squeaking and no heat (Dryer Repair) by hackerfam 11/2/2023 10:52:15 AM(UTC)

LG Dryer DLE2301R No Heat (Dryer Repair) by mhess01 10/19/2023 4:56:37 PM(UTC)

No heat when assembled (Dryer Repair) by Guest 8/16/2023 3:44:03 AM(UTC)

whirlpool PN# W10339417; no heating after replacing element (Oven Repair (including Ranges and Cooktops)) by Guest 7/13/2023 12:27:07 PM(UTC)

Whirlpool Duet Electric dryer - no heat (Dryer Repair) by ShawnDS24 2/25/2023 9:08:24 AM(UTC)

No heat, (Dryer Repair) by tseibring 1/8/2023 7:57:44 AM(UTC)

Brand New LG gas dryer , GAS code, no heat (Dryer Repair) by lglad 11/24/2022 7:24:02 PM(UTC)

Gas Dryer GE GFDS355GL0MS No Heat. Ignitor is good E11 error. (Dryer Repair) by jim.starzynski@gmail.com 7/5/2022 6:35:29 PM(UTC)

Dryer starts, does not stop, no heat (Dryer Repair) by Guest 6/28/2022 11:03:33 AM(UTC)

Samsung Electric Range-No Heat (Oven Repair (including Ranges and Cooktops)) by Jimh64 6/27/2022 8:39:17 AM(UTC)

Samsung Dryer DV448AEP/XAC - no heat (Dryer Repair) by mgmjtech 5/18/2022 8:22:27 PM(UTC)

heeat turns on no heat comming up through floor register (Heating, Ventilation, and Air Conditioning (HVAC)) by Guest 2/6/2022 2:57:49 PM(UTC)