Rank: Member
Groups: Registered
Joined: 10/1/2008(UTC) Posts: 5
|
When I hit the control on my oven control panel to raise the temp it automatically just goes down in temp even if i hit it to go up in temp. 350 is as high as it goes . It cooks fine at that temp but is all it will do on bake. If I put the oven on broil the temp will go where it is suppose to. I was told I needed a new control board which is almost $500. Is this what you think the problem is with the oven. The oven is 9 years old. Thank you for responding soon.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC) Posts: 3,097
|
can you post your model numer. the number you have is a part number or something. you can find the model number on the frame of the unit after opening the drawer on the bottom. Nat
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/1/2008(UTC) Posts: 5
|
Originally Posted by: libertyappl  can you post your model numer. the number you have is a part number or something. you can find the model number on the frame of the unit after opening the drawer on the bottom. Nat I HAVE MODEL #886380SP086 ( MAYBE THE FIVE I GAVE YOU WAS ACTUALLY A S. THE O COULD POSSIBLY BE ZERO OR VICE VERSA/ THE SERIAL NUMBER IS x30401075. I WILL HAVE TO CHECK AT LUNCH IF THIS MODEL # STILL DOES NOT WORK FOR YOU.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC) Posts: 3,097
|
It should look something like this.... RF386PXEQ
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/1/2008(UTC) Posts: 5
|
Whirlpool Model # RBS305PD86. Believe this will be correct.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/1/2008(UTC) Posts: 5
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC) Posts: 3,097
|
Glenna, The control board for your oven is only about $275 if you order it from this site. The part # is AP3009794. And you Could put it in yourself and save lots of $$ which is a lot cheaper than a new one!! Nat
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/1/2008(UTC) Posts: 5
|
Do You Think That That Is What The Problem Is With The Oven And I Have Been Told The Right Thing?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC) Posts: 3,097
|
Glenna that is definately what it sounds like! Nat
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close