3 Pages123> Go to Page...

Weak Whirlpool Agitator Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LSQ9010LG0	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

Tunaman		#1 Posted : Tuesday, September 16, 2008 10:55:45 AM(UTC)
Rank: Member Groups: Registered Joined: 7/7/2008(UTC) Posts: 14		The agitator barely moves. With a slight bit of hand preasure on the top of it, I can feel it trying to move. How can I repair this? :confused:
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

libertyappl		#2 Posted : Tuesday, September 16, 2008 11:00:13 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Does the bottom part of the agitator move? Nat
User Profile View All Posts by User View Thanks

Tunaman		#3 Posted : Tuesday, September 16, 2008 11:07:00 AM(UTC)
Rank: Member Groups: Registered Joined: 7/7/2008(UTC) Posts: 14		Not Really. :(
User Profile View All Posts by User View Thanks

libertyappl		#4 Posted : Tuesday, September 16, 2008 11:09:15 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Does it make any strange sounds?
User Profile View All Posts by User View Thanks

libertyappl		#5 Posted : Tuesday, September 16, 2008 11:14:19 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Also does it spin and drain? nat
User Profile View All Posts by User View Thanks

Tunaman		#6 Posted : Tuesday, September 16, 2008 12:27:18 PM(UTC)
Rank: Member Groups: Registered Joined: 7/7/2008(UTC) Posts: 14		The washing machine works fine as far as the cycles, ie., spin, drain and etc. The agitator simply doesn't agitate the way it used to. In an older washing machine I used to have, there were these plastic gear-like parts that I had to replace to correct a similar problem. :(
User Profile View All Posts by User View Thanks

libertyappl		#7 Posted : Tuesday, September 16, 2008 12:44:53 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		They are called agitator dogs part # 80040. which might be part of the problem, but if bottom isn't workign right may need to look at the grooves in the bottom of the agitator. Nat
User Profile View All Posts by User View Thanks

Tunaman		#8 Posted : Wednesday, September 17, 2008 6:09:01 AM(UTC)
Rank: Member Groups: Registered Joined: 7/7/2008(UTC) Posts: 14		CORRECTION! Upon
User Profile View All Posts by User View Thanks

Tunaman		#9 Posted : Wednesday, September 17, 2008 6:12:11 AM(UTC)
Rank: Member Groups: Registered Joined: 7/7/2008(UTC) Posts: 14		Upon further inspection, the bottom section of the agitator works great. It is the upper section that does not. Earlier I stated that it didn't. Yes, the bottom of the agitator moves.
User Profile View All Posts by User View Thanks

libertyappl		#10 Posted : Wednesday, September 17, 2008 7:05:03 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Then you are going to need those agitator dogs 80040. Do you wash a lot of heavy stuff? If so you may want to lighten the loads. Nat
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)

3 Pages123> Go to Page...