9 Pages«<23456>» Go to Page...

Gas dryer running but no heat Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LGR7648KQ1	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

Gene		#31 Posted : Monday, January 31, 2011 1:46:28 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: mqcheng64 Maytag MDG8600AWW Dryer Sounds like the problem is a bad gas valve itself. - The gas valve Part number: AP4037259 Here are the breakdown diagrams and Replacement parts for MAYTAG MDG8600AWW DRYER | AppliancePartsPros.com Gene.
User Profile View All Posts by User View Thanks

MFSTOFFEL		#32 Posted : Monday, January 31, 2011 2:34:36 PM(UTC)
Rank: Member Groups: Registered Joined: 1/31/2011(UTC) Posts: 2		Got a gas dryer Whirlpool model SGDX600JQ2, the timer is not turning, heat will kick in for about 5 minutes, then the heat will shut off, the dryer will keep on turning all day if a do not shut it off manually. I need advise an what to part to buy. Matt
User Profile View All Posts by User View Thanks

Gene		#33 Posted : Monday, January 31, 2011 5:20:58 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Mr Matt, Very likely the problem is a bad gas valve coils. - The coil kit Part number: AP3094251 Here are the breakdown diagrams and Replacement parts for WHIRLPOOL SGDX600JQ2 | AppliancePartsPros.com Gene.
User Profile View All Posts by User View Thanks

MFSTOFFEL		#34 Posted : Tuesday, February 1, 2011 6:57:35 AM(UTC)
Rank: Member Groups: Registered Joined: 1/31/2011(UTC) Posts: 2		Originally Posted by: Gene Mr Matt, Very likely the problem is a bad gas valve coils. - The coil kit Part number: AP3094251 Here are the breakdown diagrams and Replacement parts for WHIRLPOOL SGDX600JQ2 | AppliancePartsPros.com Gene. Hi Gene, I will order the parts to install, and keep you posted on the outcome. Thx for your quick response. Matt ;)
User Profile View All Posts by User View Thanks

mqcheng64		#35 Posted : Thursday, February 3, 2011 3:11:45 PM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2011(UTC) Posts: 22		Hi Gene, This is Mqcheng64 , I received the Gas Valve today from APP. and installed it, it's works few times and goes back same problem. what do i do next?Thanks
User Profile View All Posts by User View Thanks

Gene		#36 Posted : Thursday, February 3, 2011 4:40:52 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: mqcheng64 Hi Gene, This is Mqcheng64 , I received the Gas Valve today from APP. and installed it, it's works few times and goes back same problem. what do i do next?Thanks Unlikely, but there is a small chance that the flame sensor contacts open prematurely. - The flame sensor Part number: AP2910747 Gene. P.S. Be aware that any unneeded parts purchased from Appliance Parts Pros can be return within 45 days.
User Profile View All Posts by User View Thanks

mqcheng64		#37 Posted : Thursday, February 3, 2011 7:34:31 PM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2011(UTC) Posts: 22		Hi Gene, The gas valve came in today from App and I installed it. I tested a few times it's works fine. put everything back together and test a first load and went back same problems.Please advise , Thanks mqcheng64
User Profile View All Posts by User View Thanks

mqcheng64		#38 Posted : Thursday, February 3, 2011 7:43:53 PM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2011(UTC) Posts: 22		Hi Gene, The gas valve came in today from App and I installed it right away. It's works first few tested.After I put it's together then test a first load and went back same problem.The ignitor glow for 20 seconds then goes out I could smell gas but no flame. Thanks
User Profile View All Posts by User View Thanks

mqcheng64		#39 Posted : Friday, February 4, 2011 6:29:25 AM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2011(UTC) Posts: 22		Hi gene, I checked with multimeter and there is contuinity in flame sensor. Perhaps Temperature control element broke.please advise,Thanks.
User Profile View All Posts by User View Thanks

Gene		#40 Posted : Friday, February 4, 2011 12:23:40 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The possible problem with the flame sensor I mentioned in the previous post can not be proved by continuity test. I would just order it and give it a try. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (10)

Similar Topics

Gas Dryer running but no heat (Dryer Repair) by cpenn42 8/26/2011 4:50:25 PM(UTC)

9 Pages«<23456>» Go to Page...