9 Pages<1234>» Go to Page...

Gas dryer running but no heat Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LGR7648KQ1	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

sped3		#11 Posted : Monday, April 6, 2009 9:15:40 AM(UTC)
Rank: Member Groups: Registered Joined: 4/6/2009(UTC) Posts: 1		Originally Posted by: Gene You are welcome. Hopefully the problem is solved. Gene. gene, similarly, my gas dryer will start hot, then some time during its cycle go cold, the clothes will not be dry...i am guessing the cdryer is hot only for 5- 10 mins then will not get hot again for over an hour after shut off
User Profile View All Posts by User View Thanks

Gene		#12 Posted : Monday, April 6, 2009 3:50:11 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Replace the gas valve coils. Gene.
User Profile View All Posts by User View Thanks

Boeing747400		#13 Posted : Thursday, October 14, 2010 9:53:30 AM(UTC)
Rank: Member Groups: Registered Joined: 10/14/2010(UTC) Posts: 2		HI GENE, I HAVE SIMILAR PROBLEM WITH MY DRYER. My dryer runs but there is no heat. The timer cycles except on the Automatic setting! I FOLLOW YOUR POST HERE BY REPLACING THE THERMAL FUSE AND CYCLING THERMOSTAT from your company(btw fastest service ever :) . MY AUTOMATIC SETTING WORK NOW BUT IT SEEM LIKE it working intermittently. FIRST LOAD automatic setting didn't turn, SECOND LOAD FINE. I look through the peep hole there was a glow at my gas ignitor and fire but after a couple of minute it turn off by it self. Obviously my dryer is working much better than before and finally it heat up but not all the time :confused: please help!
User Profile View All Posts by User View Thanks

Gene		#14 Posted : Thursday, October 14, 2010 8:19:07 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: Boeing747400 HI GENE, I HAVE SIMILAR PROBLEM WITH MY DRYER. My dryer runs but there is no heat. The timer cycles except on the Automatic setting! I FOLLOW YOUR POST HERE BY REPLACING THE THERMAL FUSE AND CYCLING THERMOSTAT from your company(btw fastest service ever :) . MY AUTOMATIC SETTING WORK NOW BUT IT SEEM LIKE it working intermittently. FIRST LOAD automatic setting didn't turn, SECOND LOAD FINE. I look through the peep hole there was a glow at my gas ignitor and fire but after a couple of minute it turn off by it self. Obviously my dryer is working much better than before and finally it heat up but not all the time :confused: please help! Make sure the dryer vent line is clean all the way through the vent outlet. If it would not help, replace the gas valve coils. - The coil kit Part number: AP2150379 Gene.
User Profile View All Posts by User View Thanks

Boeing747400		#15 Posted : Monday, October 25, 2010 6:39:37 PM(UTC)
Rank: Member Groups: Registered Joined: 10/14/2010(UTC) Posts: 2		:D problem solved with the Gas coil thank you so much Gene for your help. Now my dryer is working like new again, total cost for repair include shipping is less than $55 awesome awesome awesome
User Profile View All Posts by User View Thanks

Gene		#16 Posted : Tuesday, October 26, 2010 1:04:25 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. I'm glad you were able to fix it. Gene.
User Profile View All Posts by User View Thanks

Duderino		#17 Posted : Wednesday, October 27, 2010 10:06:06 AM(UTC)
Rank: Member Groups: Registered Joined: 10/27/2010(UTC) Posts: 7		I have a similar situation. The dryer starts and the heat starts, then the heat goes out. It eventually starts back up again but it is taking a very long time to dry clothes. My wife noticed that the time default time is displaying 31 minutes now, before it was 60 something if that helps. I have replaced: Thermal Fuse Thermistor Gas Coils Hi Limit Thermostat This all started after I opened up the dryer to replace a squeaky Idler Pulley. Any ideas of what to do next? Maytag Gas Dryer
User Profile View All Posts by User View Thanks

Gene		#18 Posted : Wednesday, October 27, 2010 4:23:40 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		What is the complete model number of the dryer? Have you checked the blower and the dryer exhaust line? Gene.
User Profile View All Posts by User View Thanks

Duderino		#19 Posted : Thursday, October 28, 2010 9:55:26 AM(UTC)
Rank: Member Groups: Registered Joined: 10/27/2010(UTC) Posts: 7		Thanks for the reply. I have a Maytag Gas Dryer, model # MDG5500AWW. I took off the flexible line and cleaned it out (it is only about 8 inches long) and cleaned out the vent (it goes up to the roof) as best I could. I'm not sure what you mean by checking the blower, here is what I have done. I ran the dryer without being hooked up to the vent and heat comes out.
User Profile View All Posts by User View Thanks

Duderino		#20 Posted : Tuesday, November 9, 2010 11:33:34 AM(UTC)
Rank: Member Groups: Registered Joined: 10/27/2010(UTC) Posts: 7		Update: I ran a full cycle without being hooked up to the vent and had the same issue (clothes not drying). I found a Sensor Bar Assembly that failed the continuity check so I am currently waiting for that part. Could that be causing the problem? One of the past posts mentioned that the High Limit Thermostat could be bad even though it passed continuity. Should I replace it ? Looking for some help, thanks.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (18)

Similar Topics

Gas Dryer running but no heat (Dryer Repair) by cpenn42 8/26/2011 4:50:25 PM(UTC)

9 Pages<1234>» Go to Page...