Rank: Member
Groups: Registered
Joined: 11/1/2010(UTC)
Posts: 8
|
Originally Posted by: Joe / APP Team  Don, Got your jpeg image, That clip appears to be part of the "spin tube" basket drive assembly. It is part #3 in the parts diagram Part number: AP4260762
and is located below the bottom "spider" plate of the tube assembly, above the guard ring and clutch pads. I hope this helps. :) :) :) Thanks a million Joe that was it! Everything else looks great! I'll let you know when it works, ha ha ha. You have been a great help !!! Don
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: drc-clwtr Thanks a million Joe that was it!
Everything else looks great!
I'll let you know when it works, ha ha ha.
You have been a great help !!!
Don Don, You've done a great job(and all the work). Yes, please let us know when your up and running. :) :) :)
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/1/2010(UTC)
Posts: 8
|
Originally Posted by: Joe / APP Team Don, Got your jpeg image, That clip appears to be part of the "spin tube" basket drive assembly. It is part #3 in the parts diagram Part number: AP4260762
and is located below the bottom "spider" plate of the tube assembly, above the guard ring and clutch pads. I hope this helps. :) :) :) Thanks again Joe for all your help. everything is back together and working just fine. Ran two loads already and there is no unsual noise. The problem was the gear and spline at the lower end of the agitator shaft. I replaced the whole shaft assembly, reassembled the gearcase and it is perfect. Thanks again. Don
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: drc-clwtr Thanks again Joe for all your help. everything is back together and working just fine. Ran two loads already and there is no unsual noise. The problem was the gear and spline at the lower end of the agitator shaft. I replaced the whole shaft assembly, reassembled the gearcase and it is perfect. Thanks again.
Don That's an even greater accomplishment, You've got skills ... as they say. :cool: :cool: :cool:
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
