Clicking as spin stops Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: CP3906528	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

steveandpeggy		#1 Posted : Wednesday, August 6, 2008 10:39:12 PM(UTC)
Rank: Member Groups: Registered Joined: 8/6/2008(UTC) Posts: 5		I have a top loading whirlpool which runs all the way through all cycles. As the spin cycle ends although it makes a loud clicking/ratchiting sound until it comes to a stop. Any help will be appreciated. Steve
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

richappy		#2 Posted : Thursday, August 7, 2008 1:54:36 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Check the spin basket, does it feel loose?
User Profile View All Posts by User View Thanks

steveandpeggy		#3 Posted : Thursday, August 7, 2008 8:26:27 AM(UTC)
Rank: Member Groups: Registered Joined: 8/6/2008(UTC) Posts: 5		The resistance seems normal.
User Profile View All Posts by User View Thanks

steveandpeggy		#4 Posted : Thursday, August 7, 2008 9:36:48 AM(UTC)
Rank: Member Groups: Registered Joined: 8/6/2008(UTC) Posts: 5		The correct model number islsq9600lw1
User Profile View All Posts by User View Thanks

steveandpeggy		#5 Posted : Sunday, August 17, 2008 5:47:17 PM(UTC)
Rank: Member Groups: Registered Joined: 8/6/2008(UTC) Posts: 5		You were correct-it was the drive block. The tabs on the spin tube needed to be bent back out as well. Thank You!
User Profile View All Posts by User View Thanks

francine		#6 Posted : Wednesday, August 20, 2008 2:59:38 PM(UTC)
Rank: Member Groups: Registered Joined: 8/20/2008(UTC) Posts: 1		Originally Posted by: steveandpeggy You were correct-it was the drive block. The tabs on the spin tube needed to be bent back out as well. Thank You! this is the first time i'm using this site. i have the same problem with my whirlpool washer. is it an expensive fix?
User Profile View All Posts by User View Thanks

steveandpeggy		#7 Posted : Wednesday, August 20, 2008 3:51:59 PM(UTC)
Rank: Member Groups: Registered Joined: 8/6/2008(UTC) Posts: 5		Drive block was $15.00 at my local appliance store.
User Profile View All Posts by User View Thanks

richappy		#8 Posted : Wednesday, August 20, 2008 4:10:08 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Be careful if you have this problem. If you let it go too long, the tabs on the spin tube will get a slant and it will require replacement of the spin tube, a messy job with turbine oil and $68 cost for new spin tube. Best to use the special spanner wrench for this job.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (7)