Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: whalepirot  ...A power interruption has caused all but out oven lights to be inop. I am thinking either a power board component or one on the ERC, from the spike that got through... Most likely the problem is a bad ERC (aka a clock/timer) but there is a small chance for the upper oven relay board to be bad as well because of the low voltage transformer integrated in the board. It's probably a good idea to order both parts and return unneeded later. I found some troubleshooting instructions for this model which are attached to the reply. - The ERC Part number: AP4283511
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/16/2010(UTC)
Posts: 17
|
Originally Posted by: Gene Here are the breakdown diagrams .......
Gene. Thank you Gene, for ALL of that. Parts are ordered. Should I put just the relay in board first?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
You are welcome.
I would replace the ERC first.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/16/2010(UTC)
Posts: 17
|
Originally Posted by: Gene I would replace the ERC first.Gene. If I change the relay board first, the only one they sent, will it get damaged if the ERC turns out faulty? We need our oven. Despite being charged for both pricey boards, only one was sent with no notice of the other being back ordered, until the box arrived. No expected ship date on the ERC. Not good customer service.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: whalepirot If I change the relay board first, the only one they sent, will it get damaged if the ERC turns out faulty?
We need our oven.
Despite being charged for both pricey boards, only one was sent with no notice of the other being back ordered, until the box arrived.
No expected ship date on the ERC. Not good customer service. It is continued here: http://forum.appliancepartspros...r-power-interrupt-2.htmlGene.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
