humming garbage disposal Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GFC320F	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

jbntouch		#1 Posted : Friday, February 29, 2008 4:54:00 PM(UTC)
Rank: Member Groups: Registered Joined: 2/29/2008(UTC) Posts: 1		My garbage disposal just started humming! Nothing is in it, I looked this model up and there is only a screw at the bottom, what does this go to? There is nothing that up can stick anything in to loosen. Is there any other way to loosen the blade.
User Profile View All Posts by User Active Users

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

roycreamer		#2 Posted : Friday, February 29, 2008 6:39:30 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 2/16/2008(UTC) Posts: 79		get a mop handle (or something similar) and put it down there and twist around with a large circular motion. make sure it's off... if you replace it, get an insinkerator... anything except a ge
User Profile View All Posts by User View Thanks

handyman101		#3 Posted : Wednesday, May 14, 2008 8:45:39 AM(UTC)
Rank: Member Groups: Registered Joined: 5/14/2008(UTC) Posts: 1		i also had the same problem problem. GE garbage disposal just pissed me off.
User Profile View All Posts by User View Thanks

norma1231		#4 Posted : Friday, April 22, 2011 6:22:36 AM(UTC)
Rank: Member Groups: Registered Joined: 4/22/2011(UTC) Posts: 1		Originally Posted by: roycreamer get a mop handle (or something similar) and put it down there and twist around with a large circular motion. make sure it's off... if you replace it, get an insinkerator... anything except a ge[ thanks so much i did that and it is working the screw at the bottom goes to the electricity..
User Profile View All Posts by User View Thanks

allanmurray20		#5 Posted : Wednesday, May 8, 2013 9:43:55 AM(UTC)
Rank: Member Groups: Registered Joined: 11/29/2012(UTC) Posts: 0		Such an interesting topic to discuss just like discussing about tree pruning vancouver while surfing goggle maps.
User Profile View All Posts by User View Thanks

allanmurray20		#6 Posted : Thursday, May 9, 2013 8:06:10 AM(UTC)
Rank: Member Groups: Registered Joined: 11/29/2012(UTC) Posts: 0		Try using a motor or mechanical oil to loosen the screw, it might be full of rust. In door repairs it is often used such as in garage door services in alberta and door maintenance.
User Profile View All Posts by User View Thanks

jc920060		#7 Posted : Friday, August 9, 2013 1:49:35 AM(UTC)
Rank: Member Groups: Registered Joined: 8/8/2013(UTC) Posts: 0		Hello Friends, I am new on this forum. please add me on you conversation. Thank you in advance. _________________________________ Immigration Canada India Tour
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)