Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
mnunno  
#1 Posted : Friday, February 26, 2010 1:15:35 PM(UTC)
mnunno

Rank: Member

Groups: Registered
Joined: 12/14/2009(UTC)
Posts: 8

Sounds like the main drum bearing is wearing out. Lots of noise on the spin cycle. Any help on how to remove and replace. Model MAH4000AWW
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Friday, February 26, 2010 3:48:52 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: mnunno Go to Quoted Post
Sounds like the main drum bearing is wearing out. Lots of noise on the spin cycle. Any help on how to remove and replace. Model MAH4000AWW


Maytag does not sell this bearing separate. It comes as a part of the rear outer tub and price for this part went up to $535 + shipping for an over sized item. It makes such repair worthless.

On the other side, if you are handy enough, you can replace just the bearing. You can find some useful information in one of our previous threads: http://forum.appliancepartspros...ng-neptune-bearings.html

Here are the breakdown diagrams and Replacement parts for MAYTAG MAH4000AWW Washer - Horizontal Axis | AppliancePartsPros.com

Gene.
mnunno  
#3 Posted : Saturday, February 27, 2010 5:27:32 PM(UTC)
mnunno

Rank: Member

Groups: Registered
Joined: 12/14/2009(UTC)
Posts: 8

Once again Gene you are the man. thanks. Mike
Gene  
#4 Posted : Saturday, February 27, 2010 6:08:11 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome Mike. Good luck and keep us posted.

Gene.
mnunno  
#5 Posted : Wednesday, March 3, 2010 2:19:44 PM(UTC)
mnunno

Rank: Member

Groups: Registered
Joined: 12/14/2009(UTC)
Posts: 8

What exactly is the wax motor? and should I plan on replacing it while I am doing the bearing job.
Gene  
#6 Posted : Wednesday, March 3, 2010 7:22:02 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The wax motor is a part of the door latch and it has nothing to do with the bearing problem unless there is more problems with your washer.

Gene.
dvaut  
#7 Posted : Thursday, March 18, 2010 6:16:21 PM(UTC)
dvaut

Rank: Member

Groups: Registered
Joined: 3/18/2010(UTC)
Posts: 1

I replaced my bearings after a lot of intensive web investigation. There is one important item that nobody talks about, that is, properly seating the drum. So I put up a web page on it at

neptune bearings

hope this helps somebody because if those bearings are not seated water gets in and all is in vain.
Gene  
#8 Posted : Friday, March 19, 2010 12:53:51 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: dvaut Go to Quoted Post
I replaced my bearings after a lot of intensive web investigation. There is one important item that nobody talks about, that is, properly seating the drum. So I put up a web page on it at

neptune bearings

hope this helps somebody because if those bearings are not seated water gets in and all is in vain.


Just wanted to thank you for sharing your repair with us. Your post was very helpful and instructive.

Good luck with your washer.

Gene.
bob mason  
#9 Posted : Wednesday, May 9, 2012 2:40:57 PM(UTC)
bob mason

Rank: Member

Groups: Registered
Joined: 5/9/2012(UTC)
Posts: 4

i need to know how to raise top lid. to i lift from the or rear. do i have to remove any parts first. thank-you. bob mason
Users browsing this topic
Guest (3)
Similar Topics
Lr code on my Maytag Neptune Front Load Washer (Washer Repair)
by Guest 11/19/2022 9:53:55 AM(UTC)
Maytag Neptune Front Load Washer “do” code (Washer Repair)
by Guest 12/25/2021 2:22:33 PM(UTC)
Maytag Neptune front load washer MAH7000AWW (Washer Repair)
by kerrlakecrappieman@gmail.com 3/16/2019 7:53:32 PM(UTC)
Maytag Neptune Front Load Washer Squealing (Washer Repair)
by ArcadeMan 2/10/2014 10:31:10 AM(UTC)
Maytag Neptune Front Load Washer (Washer Repair)
by debbierocks 4/1/2012 6:59:03 AM(UTC)
maytag neptune front load washer (Washer Repair)
by lbrennan 3/12/2012 12:36:33 PM(UTC)
maytag neptune front load washer (Washer Repair)
by barbara witkowski 5/18/2011 4:56:21 PM(UTC)
Need Help with a Maytag Neptune front load washer....stops running at each cycle. (Washer Repair)
by carebear03303 2/11/2011 6:43:15 AM(UTC)
Maytag Neptune Front Load Washer (Washer Repair)
by gmhandel 9/18/2010 4:57:34 PM(UTC)
MAYTAG NEPTUNE FRONT LOAD WASHER, Clothes come out soaking wet (Washer Repair)
by debbielf 8/31/2009 8:05:14 AM(UTC)
Maytag Neptune Front Load Washer Help (Washer Repair)
by debster101 7/23/2009 1:03:06 PM(UTC)
Maytag Neptune front load Washer (Dryer Repair)
by castillocm 7/31/2008 4:03:24 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.