Maytag Neptune Front load washer Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

mnunno		#1 Posted : Friday, February 26, 2010 1:15:35 PM(UTC)
Rank: Member Groups: Registered Joined: 12/14/2009(UTC) Posts: 8		Sounds like the main drum bearing is wearing out. Lots of noise on the spin cycle. Any help on how to remove and replace. Model MAH4000AWW
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Friday, February 26, 2010 3:48:52 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: mnunno Sounds like the main drum bearing is wearing out. Lots of noise on the spin cycle. Any help on how to remove and replace. Model MAH4000AWW Maytag does not sell this bearing separate. It comes as a part of the rear outer tub and price for this part went up to $535 + shipping for an over sized item. It makes such repair worthless. On the other side, if you are handy enough, you can replace just the bearing. You can find some useful information in one of our previous threads: http://forum.appliancepartspros...ng-neptune-bearings.html Here are the breakdown diagrams and Replacement parts for MAYTAG MAH4000AWW Washer - Horizontal Axis | AppliancePartsPros.com Gene.
User Profile View All Posts by User View Thanks

mnunno		#3 Posted : Saturday, February 27, 2010 5:27:32 PM(UTC)
Rank: Member Groups: Registered Joined: 12/14/2009(UTC) Posts: 8		Once again Gene you are the man. thanks. Mike
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Saturday, February 27, 2010 6:08:11 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome Mike. Good luck and keep us posted. Gene.
User Profile View All Posts by User View Thanks

mnunno		#5 Posted : Wednesday, March 3, 2010 2:19:44 PM(UTC)
Rank: Member Groups: Registered Joined: 12/14/2009(UTC) Posts: 8		What exactly is the wax motor? and should I plan on replacing it while I am doing the bearing job.
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Wednesday, March 3, 2010 7:22:02 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The wax motor is a part of the door latch and it has nothing to do with the bearing problem unless there is more problems with your washer. Gene.
User Profile View All Posts by User View Thanks

dvaut		#7 Posted : Thursday, March 18, 2010 6:16:21 PM(UTC)
Rank: Member Groups: Registered Joined: 3/18/2010(UTC) Posts: 1		I replaced my bearings after a lot of intensive web investigation. There is one important item that nobody talks about, that is, properly seating the drum. So I put up a web page on it at neptune bearings hope this helps somebody because if those bearings are not seated water gets in and all is in vain.
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Friday, March 19, 2010 12:53:51 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: dvaut I replaced my bearings after a lot of intensive web investigation. There is one important item that nobody talks about, that is, properly seating the drum. So I put up a web page on it at neptune bearings hope this helps somebody because if those bearings are not seated water gets in and all is in vain. Just wanted to thank you for sharing your repair with us. Your post was very helpful and instructive. Good luck with your washer. Gene.
User Profile View All Posts by User View Thanks

bob mason		#9 Posted : Wednesday, May 9, 2012 2:40:57 PM(UTC)
Rank: Member Groups: Registered Joined: 5/9/2012(UTC) Posts: 4		i need to know how to raise top lid. to i lift from the or rear. do i have to remove any parts first. thank-you. bob mason
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)

Similar Topics

Lr code on my Maytag Neptune Front Load Washer (Washer Repair) by Guest 11/19/2022 9:53:55 AM(UTC)

Maytag Neptune Front Load Washer “do” code (Washer Repair) by Guest 12/25/2021 2:22:33 PM(UTC)

Maytag Neptune front load washer MAH7000AWW (Washer Repair) by kerrlakecrappieman@gmail.com 3/16/2019 7:53:32 PM(UTC)

Maytag Neptune Front Load Washer Squealing (Washer Repair) by ArcadeMan 2/10/2014 10:31:10 AM(UTC)

Maytag Neptune Front Load Washer (Washer Repair) by debbierocks 4/1/2012 6:59:03 AM(UTC)

maytag neptune front load washer (Washer Repair) by lbrennan 3/12/2012 12:36:33 PM(UTC)

maytag neptune front load washer (Washer Repair) by barbara witkowski 5/18/2011 4:56:21 PM(UTC)

Need Help with a Maytag Neptune front load washer....stops running at each cycle. (Washer Repair) by carebear03303 2/11/2011 6:43:15 AM(UTC)

Maytag Neptune Front Load Washer (Washer Repair) by gmhandel 9/18/2010 4:57:34 PM(UTC)

MAYTAG NEPTUNE FRONT LOAD WASHER, Clothes come out soaking wet (Washer Repair) by debbielf 8/31/2009 8:05:14 AM(UTC)

Maytag Neptune Front Load Washer Help (Washer Repair) by debster101 7/23/2009 1:03:06 PM(UTC)

Maytag Neptune front load Washer (Dryer Repair) by castillocm 7/31/2008 4:03:24 PM(UTC)