dryer not working Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LTG6234DQO	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

jfitco		#1 Posted : Sunday, September 20, 2009 3:46:38 PM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2009(UTC) Posts: 4		when we pushed the start button it made a noise. then stopped working completely, i checked the contact knob on the dryer and it is clicking okay. power is fine to the dryer. this is a stacked washer dryer unit
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

ApplianceJunk		#2 Posted : Sunday, September 20, 2009 4:43:35 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 7/24/2007(UTC) Posts: 2,277		Hi, Check the broken belt switch. Part Details - WHIRLPOOL Broken belt switch, part number: AP3094230 On your model dryer when the belt brakes it trips a switch near the belt idler.
User Profile View All Posts by User View Thanks

ApplianceJunk		#3 Posted : Sunday, September 20, 2009 4:44:54 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 7/24/2007(UTC) Posts: 2,277		The switch is #4 in the diagram.
User Profile View All Posts by User View Thanks

jfitco		#4 Posted : Sunday, September 20, 2009 5:09:47 PM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2009(UTC) Posts: 4		It sounded electrical when i pushed the start buttom. a little like a contact problem
User Profile View All Posts by User View Thanks

ApplianceJunk		#5 Posted : Sunday, September 20, 2009 5:15:12 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 7/24/2007(UTC) Posts: 2,277		So you checked the belt and it was fine?
User Profile View All Posts by User View Thanks

jfitco		#6 Posted : Sunday, September 20, 2009 5:20:54 PM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2009(UTC) Posts: 4		I will need tocheck in the am it is too dark to work in the area.t just did not sound like a belt
User Profile View All Posts by User View Thanks

ApplianceJunk		#7 Posted : Sunday, September 20, 2009 5:23:17 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 7/24/2007(UTC) Posts: 2,277		Remove panel #27 in the driagram by removing the three (#47) screws. You will be able to look behind the panel and see the belt around the drum, unless it's broken, then it maybe on the bottom.
User Profile View All Posts by User View Thanks

jfitco		#8 Posted : Tuesday, September 22, 2009 12:57:04 PM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2009(UTC) Posts: 4		the belt checked out fine. I am wondering if is the motor
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (7)

Similar Topics

Amana electric dryer not working (Dryer Repair) by Guest 5/3/2024 10:43:01 AM(UTC)

Kenmore Elite Electric Dryer not working (Dryer Repair) by Guest 7/24/2022 7:10:35 AM(UTC)

GE Dryer Not Working (Dryer Repair) by DWMarsh 4/14/2020 2:43:03 PM(UTC)

Gas dryer not working properly after power outage (Dryer Repair) by Frazierfam5 3/7/2016 4:43:32 PM(UTC)

Dryer not working (Dryer Repair) by Cynthia Sosa 9/25/2015 7:00:01 AM(UTC)

Maytag Bravos Electric dryer not working after Power failure (Dryer Repair) by JohannesB 6/29/2015 3:16:19 AM(UTC)

Dryer Not Working (Dryer Repair) by cubbiesbp 3/11/2015 1:02:55 PM(UTC)

dryer not working on timed cycle (Dryer Repair) by kwikk4 2/23/2015 7:53:40 AM(UTC)

Dryer not working properly (Dryer Repair) by gdmcc1955 8/5/2014 9:59:33 AM(UTC)

Dryer not working (Dryer Repair) by Vitocar 6/17/2014 11:12:39 AM(UTC)

dryer not working (surprise!) (Dryer Repair) by thebrokenwhirlpool 3/8/2014 11:26:54 AM(UTC)

Dryer not working right (Dryer Repair) by Monsters 10/1/2013 6:59:17 PM(UTC)

Kenmore dryer not working (Dryer Repair) by JuanY 5/21/2013 8:57:38 AM(UTC)

Roper dryer not working in auto sense mode. (Dryer Repair) by CWeasel 7/15/2012 10:03:37 AM(UTC)

Dryer not working (Dryer Repair) by redrider65 2/20/2012 1:25:39 PM(UTC)