Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
9 Pages123>»
Gas dryer running but no heat
Options
Go to last post Go to first unread
Model: LGR7648KQ1 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
RBYRD9.1  
#1 Posted : Wednesday, January 16, 2008 9:38:11 AM(UTC)
RBYRD9.1

Rank: Member

Groups: Registered
Joined: 1/16/2008(UTC)
Posts: 4
My dryer runs but there is no heat. The timer cycles except on the Automatic setting. There was no glow at the gas ignitor so I replaced it. Still no glow. Any ideas ????? A sensor maybe? Any help would be much appreciated!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Wednesday, January 16, 2008 5:06:31 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The first thing I would check for continuity is the thermal fuse (#7 on the bulkhead parts break down diagram).

If the thermal fuse is blown, it has to be replaced together with the cycling thermostat (#9 on the bulkhead parts break down diagram).

- The part number for the thermal fuse is AP3132867

- The part number for the cycling thermostat is AP3131939

Here are the break down diagrams for the Whirlpool dryer Model LGR7648KQ1

Gene.
Back to top
RBYRD9.1  
#3 Posted : Sunday, January 20, 2008 10:39:14 AM(UTC)
RBYRD9.1

Rank: Member

Groups: Registered
Joined: 1/16/2008(UTC)
Posts: 4
It was the thermal fuse!!! Thank you for all the links you posted also. Was a major help. Repaired for less than a service call only! My dryer now runs just like it did before... :)
Back to top
missieann33  
#4 Posted : Tuesday, January 22, 2008 9:48:04 AM(UTC)
missieann33

Rank: Member

Groups: Registered
Joined: 1/22/2008(UTC)
Posts: 1
Originally Posted by: RBYRD9.1 Go to Quoted Post
My dryer runs but there is no heat. I Have a Question. My Dryer will run but has no heat. If you put it on a regular cycle it will run all day and all night. I put it on 70 minute dry and it still has no heat but will stop after 70 minutes.. Anyone have a suggestion??:( Thanks
Back to top
Gene  
#5 Posted : Tuesday, January 22, 2008 1:25:33 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi RBYRD9.1,

I'm glad you were able to fix it.

Gene.
Back to top
Gene  
#6 Posted : Tuesday, January 22, 2008 1:27:04 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi missieann33,

In order to provide the most accurate advise I need the complete model number of the dryer.

Post it as a new thread, please.

Gene.
Back to top
RBYRD9.1  
#7 Posted : Wednesday, April 1, 2009 5:35:59 AM(UTC)
RBYRD9.1

Rank: Member

Groups: Registered
Joined: 1/16/2008(UTC)
Posts: 4
My dryer stopped heating again. I have changed the thermal fuse again and the cycling thermostat. It will cycle once and then does not heat again. The ignitor glows but it does not kick in the gas to heat.

Is this the heat coil?
Back to top
Gene  
#8 Posted : Wednesday, April 1, 2009 9:19:54 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: RBYRD9.1 Go to Quoted Post
...The ignitor glows but it does not kick in the gas to heat.

Is this the heat coil?...


Yes, most likely the problem is a bad gas valve coils. Also make sure there is no obstructions in the vent lines and the blower housing is clean.

- The part number for the coil kit is AP2150379

Gene.
Back to top
RBYRD9.1  
#9 Posted : Friday, April 3, 2009 10:38:58 AM(UTC)
RBYRD9.1

Rank: Member

Groups: Registered
Joined: 1/16/2008(UTC)
Posts: 4
Thanks again Gene! I replaced the coils and the dryer runs and cycles fine now.
Back to top
Gene  
#10 Posted : Saturday, April 4, 2009 1:31:02 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. Hopefully the problem is solved.

Gene.
Back to top
Users browsing this topic
Guest (9)
Similar Topics
Gas Dryer running but no heat (Dryer Repair)
by cpenn42 8/26/2011 4:50:25 PM(UTC)
9 Pages123>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET