Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
haeting problem
Options
Go to last post Go to first unread
Model: PYG2300AWW Brand: Maytag Age: 1 - 5 years
Previous Topic Next Topic
clay cunliffe  
#1 Posted : Monday, June 29, 2009 10:27:16 AM(UTC)
clay cunliffe

Rank: Member

Groups: Registered
Joined: 6/29/2009(UTC)
Posts: 8
igniter glows but gas will not come out or light. could sensor be the problem or is there other parts that may cause gas valve not to open. I dont know if this may be an issue but i have been having problems balancing load in washer . It has been banging up against dryer. All conections seem to be fine.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
clay cunliffe  
#2 Posted : Monday, June 29, 2009 5:41:16 PM(UTC)
clay cunliffe

Rank: Member

Groups: Registered
Joined: 6/29/2009(UTC)
Posts: 8
Please click one of the Quick Reply icons in the posts above to activate Quick Reply.
Back to top
Gene  
#3 Posted : Monday, June 29, 2009 6:07:44 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If the igniter glows but there is no gas then the problem most likely are a bad gas valve coils.

- The part number for the coil kit is AP3094251

Here are the breakdown diagrams and Replacement parts for MAYTAG PYG2300AWW | AppliancePartsPros.com

Gene.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET