Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
Bill
Options
Go to last post Go to first unread
Model: RL635T Brand: Amana Age: More than 10 years
Previous Topic Next Topic
Bill Witty  
#1 Posted : Friday, August 12, 2011 11:07:02 AM(UTC)
Quote
Bill Witty

Rank: Member

Groups: Registered
Joined: 8/12/2011(UTC)
Posts: 3
I need to replace the wire that connects the release lever to the door opening lever. There are 10 screws on the inside of the door part # AP3606629 These screws are half round like a dome with a raised Y on top of the dome . I am in need of the special tool or driver to remove these screws from the inside of the door to access the release mechanism. I am aware of the need to maintain a good seal on the door and after replacing the approximately 6 inch piece of wire that connects the handle to the release lever will use care in doing the job.
Thanking You in Advance....Bill
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Jeff / APP Team  
#2 Posted : Saturday, August 13, 2011 4:26:13 AM(UTC)
Quote
Jeff / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 2/14/2011(UTC)
Posts: 816
Hello Bill. Can you post a picture of the screw head please? Thanks.
Back to top
pw oak  
#3 Posted : Saturday, August 13, 2011 2:50:32 PM(UTC)
Quote
pw oak

Rank: Member

Groups: Registered
Joined: 8/13/2011(UTC)
Posts: 2
Originally Posted by: Bill Witty Go to Quoted Post
I need to replace the wire that connects the release lever to the door opening lever. There are 10 screws on the inside of the door part # AP3606629 These screws are half round like a dome with a raised Y on top of the dome . I am in need of the special tool or driver to remove these screws from the inside of the door to access the release mechanism. I am aware of the need to maintain a good seal on the door and after replacing the approximately 6 inch piece of wire that connects the handle to the release lever will use care in doing the job.
Thanking You in Advance....Bill



Have you tried Mr. Freitas' store on Laurel Street, NOLA?
Back to top
Bill Witty  
#4 Posted : Saturday, August 13, 2011 3:28:00 PM(UTC)
Quote
Bill Witty

Rank: Member

Groups: Registered
Joined: 8/12/2011(UTC)
Posts: 3
Originally Posted by: pw oak Go to Quoted Post
Have you tried Mr. Freitas' store on Laurel Street, NOLA?

GREAT IDEA IF WE WERE 50 YEARS YOUNGER , BUT I WAS ABLE TO SEND A PICTURE TO jEFF WHO IS A SENIOR TECH SO ALL MY HOPES ARE WITH HIM.
Back to top
pw oak  
#5 Posted : Saturday, August 13, 2011 3:35:28 PM(UTC)
Quote
pw oak

Rank: Member

Groups: Registered
Joined: 8/13/2011(UTC)
Posts: 2
here's the pic
pw oak attached the following image(s):
screw.jpg
Back to top
Jeff / APP Team  
#6 Posted : Monday, August 15, 2011 4:14:59 AM(UTC)
Quote
Jeff / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 2/14/2011(UTC)
Posts: 816
According to the picture you supplied, you will need to order the Y drive bit to remove the screws. Hope this helps.

Part number: AP3854781
Back to top
Bill Witty  
#7 Posted : Monday, August 15, 2011 5:45:26 AM(UTC)
Quote
Bill Witty

Rank: Member

Groups: Registered
Joined: 8/12/2011(UTC)
Posts: 3
Jeff I appreciate your help very much but after calling to order the Y drive bit part #AP3854781 and being told that it sells for $143.78 plus shipping for a total of $151.03 you can understand my reluctance to go thru with the order. Looks like I may simply drill a small hole in the side of the door to attach a new wire to connect the handle to the release lever or simply replace the unit. So in closing thanks for you assistance.................. Bill
Back to top
Jeff / APP Team  
#8 Posted : Monday, August 15, 2011 5:49:07 AM(UTC)
Quote
Jeff / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 2/14/2011(UTC)
Posts: 816
I completely understand Bill. Glad we could help.
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
To reduce my Water Bill, can I adjust Shut Off Valve under Kitchen & Sink faucet (Heating, Ventilation, and Air Conditioning (HVAC))
by tester22 12/10/2023 10:59:21 AM(UTC)
bybilly (Refrigerator & Freezer Repair)
by bybilly 4/15/2018 7:54:56 PM(UTC)
bill (Dishwasher Repair)
by blevinsohn 11/15/2012 7:13:54 AM(UTC)
Bill caddigan (Dryer Repair)
by wcaddigan@aol.com 9/25/2011 4:50:44 PM(UTC)
Bill Benson (Oven Repair (including Ranges and Cooktops))
by bill19521 12/31/2010 10:35:27 AM(UTC)
2 & 1/2 yr old LG repair bill: $700.00!!!!!!!! (Washer Repair)
by 4estlakemom 8/9/2010 11:38:39 AM(UTC)
bill yovi (Oven Repair (including Ranges and Cooktops))
by bill yovi 7/23/2010 11:16:03 AM(UTC)
Bill K (Washer Repair)
by bkesler 1/12/2010 6:53:32 AM(UTC)
Uncle Bill (Oven Repair (including Ranges and Cooktops))
by UNCLE BILL 10/16/2009 9:28:34 AM(UTC)
Bill (Dryer Repair)
by w.potaris@verizon.net 9/1/2009 3:55:41 PM(UTC)
Bill (Washer Repair)
by wvwoodchuck48 7/12/2009 10:18:06 AM(UTC)
bill summerville (Microwave Repair)
by summv 6/30/2009 12:02:57 PM(UTC)
Bill Lane (Dishwasher Repair)
by billlane501 5/1/2009 12:30:02 PM(UTC)
Bill Mac (Washer Repair)
by Bill Mac 1/22/2009 6:41:27 AM(UTC)
BillMac (Washer Repair)
by BillMac 12/4/2007 9:56:00 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET