Dishwasher Repair

oneida · #1 (**permalink**) 01-25-2011, 07:48 PM

I have a problem when you go to start the only light that comes on is the normal wash and just blinks will not start any suggestions

denman · #2 (**permalink**) 01-26-2011, 01:59 AM

Here are your parts
Replacement parts for KENMORE 66513819K600 | AppliancePartsPros.com

If you need a parts breakdown there should be on Sears Parts site.

Here is the tech sheet, see the attachment.

Try running the diagnostics to see if any additional clues to the cause come up.

A blinking light is often a shorted key.
This could be the keypad or the control pad.
The keypad keys have to be checked with a meter.
If it checks out OK then I would replace the control board.
Still a bit of a crap shoot but your odds are better.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dishwasher control lights out and dishwasher stopped working	hatchchuck	Dishwasher Repair	1	12-26-2010 04:48 AM
Dishwasher will not empty no lights on front of dishwasher except led lines	badtothebone	Dishwasher Repair	0	05-13-2010 02:17 PM
Dishwasher will not empty no lights on front of dishwasher except led lines	badtothebone	Dishwasher Repair	0	05-13-2010 02:14 PM
dishwasher spray arm melted to heating element and now dishwasher not working	msphillips2	Dishwasher Repair	0	05-08-2010 10:21 AM

dishwasher

Dishwasher Repair

I have a problem when you go to start the only light that comes on is the normal wash and