Outer Tub Repair Whirlpool Washer - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Outer Tub Repair Whirlpool Washer Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LA7800XPW1	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

wknd_warrior		#1 Posted : Thursday, June 3, 2010 10:22:08 AM(UTC)
Rank: Member Groups: Registered Joined: 6/1/2010(UTC) Posts: 4		There is a small rust hole in the outer tub located directly on top of one of the pressure points of the baseplate. Looks like the 1 of 7 friction gaskets moved out of place allowing the outer tub and the baseplate pressure point to rub together causing the hole. Can the tanks be repaired? Since there already exists a hole in the outer tub, I could drill a hole through the baseplate. Then, install a rubber washer and bolt similar to the 4 bolts and rubber washers that are used to attach the outer tub to the baseplate. Or, maybe weld a patch. But then rust is a concern. Any ideas? Thank you


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Thursday, June 3, 2010 2:55:39 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You can try to use an epoxy two part putty together with an aluminum self adhesive tape. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close