Rank: Member
Groups: Registered
Joined: 5/26/2010(UTC)
Posts: 1
|
I have a Frigidaire electric dryer AEQ07000ES0, and yesterday when I tried to dry some clothes when I would set my timer and press start it would give me a door error, when I would press cancel it would go to the touch up low heat setting and this was the only one that would work. I tried this several times all with the same result. What could this be? And is this something I can easily fix on my own, do I need parts or a repair person!? :eek:
I appreciate any help you can give
Thanks in advace,
Felts :)
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
Sounds very much like a problem with your main control board (control boards hate heat, moisture and vibration and, well, a dryer has . . .) Use this service manual to see if you can generate an error code, but at the end of the day you may have to replace the board. It is not a difficult task but the part is rather expensive. The manual will show you how. http://frigidaireservicetips.co..._AffinityDryerManual.pdf
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
