stops during cycle before rinse/spin - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

stops during cycle before rinse/spin Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

cmalagisi		#1 Posted : Wednesday, June 25, 2008 5:14:09 PM(UTC)
Rank: Member Groups: Registered Joined: 6/25/2008(UTC) Posts: 2		It doesn't go through the cycles. It will stop before the rinse cycle, then i have to reset it to rinse, but then it will stop before the spin cycle and i have to prompt it again. It is very frustrating because i have to keep going in and switching it to the next cycle. What would make it keep stoping before all 3 cycles are finished?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Thursday, June 26, 2008 2:53:00 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: cmalagisi It doesn't go through the cycles. It will stop before the rinse cycle, then i have to reset it to rinse, but then it will stop before the spin cycle and i have to prompt it again. It is very frustrating because i have to keep going in and switching it to the next cycle. What would make it keep stoping before all 3 cycles are finished? It could be a bad lid switch or a bad timer. In order to provide most accurate advise we need the complete model number of the washer. Gene.


User Profile View All Posts by User View Thanks

cmalagisi		#3 Posted : Thursday, June 26, 2008 3:01:06 PM(UTC)
Rank: Member Groups: Registered Joined: 6/25/2008(UTC) Posts: 2		Originally Posted by: Gene It could be a bad lid switch or a bad timer. In order to provide most accurate advise we need the complete model number of the washer. Gene. The model # is RAX7245JQ0. Thanks


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Thursday, June 26, 2008 4:48:18 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Unplug the power cord. Open the control panel, unplug the lid switch harness plug and bypass the lid switch (#9 on the break down diagram). Run the washer and see if it'll work properly. Post the result. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close